- Thread starter
- #21
Color does not go all the way through.
TEQ Silicone Cups
- Thread starter JohnVee
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Yea, the website shows the screenprinting operation....
How to Order a Custom Silipint | Silipint
How to Order a Custom Silipint | Silipint
Their normal pints through the shop are ~$10 too. I could see that happening. $75 setup cost plus what, $30 per cup?
In order to do that we'd need to order at least 36 cups.
The cups are cool and all but I don't think they are $30 cool. Besides I normally take my shot straight out of the jug (or bottle). Less to keep up with too. I'd be in for two at $15 each. I am a cheap ass, I know.....
NCFJ
Supporting Vendor
I'm cheaper than you then Dave, $15 for a plastic cup is way too much for me.
I honestly have no idea what it would cost per cup. The ones that are being sold through that other company seem pretty expensive, but if there is demand, we can certainly put an order of our design printed on silicone cups.
I'd be down for two or four depending on cost.
I'd be down for two or four depending on cost.
Please forgive, this is not intended as a hijack but, I'd be more interested in ONSC hats if there was going to be a club buy. Some time ago there was a thread discussing general schwag ideas but I don't believe anything came of it.
There just didn't seem to be a whole lot of demand for anything other than the t-shirts IIRC. These cups seem really popular though.
As an aside, if you buy a hat you want that logo embroidered on, we can hook up and get that done. The embroidery pattern is done due to the couple of fleeces that have been made, so it wouldn't cost a ton. Overhead becomes a big concern when we're talking about anything more than a t-shirt.
I'd be in for some. Is that really the club logo though? It's a little over used IMO.
- Thread starter
- #30
Perhaps something about a Turkish prison? Or the bad timing of your choice to stop sniffing glue?
Now we're talking! Or ya know. 'Pulling jeeps out of the mud since 1951' or the like.
T
For a custom order, the minimum quantity is 72. You'll have the set-up cost too, but the price per cup (don't hold me to it) should be around $15-17.
ontherxs
They call me Tim...
I found them at 4imprint.com silicone | Silipint Silicone Cup - 16 oz. (Item No. 115559) from only $5.49 ready to be imprinted by 4imprint Promotional Products
for abut ~ $12.50 per cup with a minimum order of 36. Price drops for more 72 is the next increment. Print 2 locations front/back each print can be a different color. Should we put a poll up and get a firm count?
for abut ~ $12.50 per cup with a minimum order of 36. Price drops for more 72 is the next increment. Print 2 locations front/back each print can be a different color. Should we put a poll up and get a firm count?
I'd buy some!
