Snapped A343F Kickdown Cable end (2 Viewers)

[florida95fzj]

Does anyone have a picture of what the end of this cable should look like?

I've seen a number of A440F pictures but not the A343F.

And does anyone know if I were to find a new end connector, would splicing work?

I believe the part I need is NLA and the A440F cable is too short.

 

[Shipwreck]

Yes, the A343 kickdown cable is nla.
I happen to have mine disconnected today. The cylinder on the end is 10 mm wide and 4.5 mm in diameter. It might be possible to braze a new fitting on the end.
A custom cable could probably be made if your housing is still in good shape.

 

[florida95fzj]

Yes, the A343 kickdown cable is nla.
I happen to have mine disconnected today. The cylinder on the end is 10 mm wide and 4.5 mm in diameter. It might be possible to braze a new fitting on the end.
A custom cable could probably be made if your housing is still in good shape.

Thank you!

 

[Cruisers and Co]

Shoot me an email Info@cruisersandcompany.com we have Toyota cables in stock for the A343F

 

[Kernal]

@florida95fzj : There's a few options if you want to fix the barrel fitting/stop:

Dimensions of the cable stop/fitting:

(from above) 10mm x 4.5mm = 3/8" x 3/16" = 0.39" x 0.177"

Throttle (Transmission) Cable diameter ~ 0.06"to 0.07" = ~1.5 to 1.7mm (diameter of hole needed in repair stop/fitting)


Some different sizes/types of repair fittings/stops:

Cable Ends - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Find Cable Ends In Stock Filter Options, Vendor In Stock Filter Options and get Free Shipping on Orders Over $109 at Summit Racing!

www.summitracing.com

https://www.motosport.com/motion-pro-throttle-cable-barrel-fittings

1 DETENT CABLE STOP! FITS TBI 700R4 200R4 TH350 TH400 TRANS AM Z28 GTO 442 ETC | eBay

1 NOS Detent Cable Stop. This little brass barrel with the slotted screw in it allows you to cut the cable to any length you need and lock it down. Show Quality! Easy Install.

www.ebay.com

IMHO if you use one of the quick repair stops with a screw to pinch the wire consider adding a drop of solder to secure it all together

------------------------------------------------------------------------------------------------------------------------------------------

Some methods to make your own barrel stop/lug:

Cable Repair for Light Loads | Auto Throttle, Valves, Linkages. #shorts

I’ll show you a quick and simple method to repair a cable when the end fitting breaks off. We make a small mold, pour lead, and get a solid connection. This ...

www.youtube.com

----------------------------------------------------------------------------------------------------------------------------




----------------------------------------------------------------------------------------------------------------------------