Shakey mirror fix with a bracket and bottom post fix (3 Viewers)

[Outsane]

Awesome!

Solvefunction.com has all the products, not much on etsy.

 

[JDMFZJ80]

Am I am idiot? I can't seem to get the bracket to work. No matter what I do, I can't get the window motor to go behind the bracket

 

[Outsane]

Am I am idiot? I can't seem to get the bracket to work. No matter what I do, I can't get the window motor to go behind the bracket

Have you watched the videos?

 

[JDMFZJ80]

Have you watched the videos?

Yeah I watched the YouTube short and the guy said to fish it around but no matter how much I fish it around, it won't catch behind. I also have the bottom post piece on too but I can't get it to sit on top of the whole in the inner mirror bracket because I can't get the motor fished up high enough behind the bracket

 

[DivByZero]

Maybe post some pics? I did this fix, was straightforward enough with the youtube video as a guide. Either there's something you're doing wrong, or there's a physical difference with your setup.

 

[JDMFZJ80]

Maybe post some pics? I did this fix, was straightforward enough with the youtube video as a guide. Either there's something you're doing wrong, or there's a physical difference with your setup.

I'll get to that here in a bit. I have a few I can send now, but I can get better ones and videos when it stops friggin raining out here.

 

[JDMFZJ80]

Maybe post some pics? I did this fix, was straightforward enough with the youtube video as a guide. Either there's something you're doing wrong, or there's a physical difference with your setup.

Pretty much just pictures of the setup before even putting on the 3d printed mount. It's on there now but don't have a pic of that yet

 

[JDMFZJ80]

 

[Rollinns]

You may try loosening the screws on the 3d printed bracket by about a half turn, the mirror still needs to be in their tight, so don't loosen them too much.

 

[Outsane]

View attachment 3605175

The ear on the left land side of the picture needs to be cut.

 

[JDMFZJ80]

You may try loosening the screws on the 3d printed bracket by about a half turn, the mirror still needs to be in their tight, so don't loosen them too much.

This may have done it! Thank you! I think I'm back in business

 

[JDMFZJ80]

Thank you, I originally thought they needed to just be open instead of completely removed. So doing this plus loosening the bracket a bit seemed to do the trick. Happy to have my mirror back!

 

[Mad Matt]

Classic, your bracket showed up in the mail today, so I went to fix my mirror only to find out that I have both a broken upper tab and the lower screw assembly is gone. . Thats what I get for not inspecting my mirror before placing my order.

 

[Outsane]

Halfway fixed! I'll print some bottom fixes in anticipation

 

[BarnBurner]

Passenger side mirror had the shakes and now it doesn’t. Great product! Will be visiting the solvefunction store for more products in the future.

 

[Slim D]

Do you have a fix for the floppy mirror issue?

 

[Delta VS]

Do you have a fix for the floppy mirror issue?

Those will be available soon on our site

 

[Slim D]

Those will be available soon on our site

Sweet! I need one badly!

 

[Vasiliy]

Does anyone know what type of plastic is used in the mirror housing? I couldn't weld PP together

 

[Vasiliy]

couldn't weld it with PP, PA, ABS