Saginaw PS pitman arm and rod questions (1 Viewer)

[Pigeaten]

“If it don’t move, get a bigger hammer.”

My grandfather, on the right here.

View attachment 2401797

He looks like Robert Deniro

 

[Pigeaten]

Pictures.
View attachment 2398500View attachment 2398506

Not sure if this helps, but this is what Gary at Mudruks did for me

 

[YukonCruisers]

That's certainly robust. I have ordered a 4x4 labs arm and their steering column extension (may require a new input on the saginaw, a bridge i will cross later). I'll see what that all looks like and go from there.

 

[YukonCruisers]

Because you all like pictures, My 4x4 lab stuff came last week and I finally had some time to play with it. The pitman arm clears, but is shorter, will have to see how that feels in the final set up. The 4x4lab stuff is certainly robust! Turns out the universal joint in the kit is just 2 mm wider in diameter and length than the stock so from the kit you can drop the first yoke and with a little light reaming, it just slides in there

 

[RUSH55]

Sweet! That looks like a nice kit - something I’m going to need in the not too distant future.

 

[YukonCruisers]

Yeah, its solid and Luke was very helpful at 4x4 labs. I am just hopeful my engine doesn't interfere as I haven't done a test fit yet..

 

[riderjgs]

"If at first you don't succeed, get a bigger hammer." - unknown

"If some is good, more is better and too much is just about right." - yours truly

 

[YukonCruisers]

Just to close this off for the next guy, Ruffstuff sells a 3" drop are that fits well in this application.