RTH Needed: 80 Series /ARB Intensity install into Slee harness (1 Viewer)

[bonestock]

Found a couple threads that seemed to be asking the right questions but could find a definitive answer.

Trying in install ARB Intensity lights using ARB harness 3500520. Stuck at the high beam trigger wire tap.

I read that the high beams are negatively switched but I am unsure where / how to tap the negative wire for the high beams.

Appreciate any help available. Got a nest of wires all busted apart.

 

[bonestock]

Solved: splice the arb trigger wire into the purple wire on the slee harness.