Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
get rid of the old sealant as clean as you possibly can. i'd probably pick it out best as you can then gently wire wheel the residuals to clean it up. then prime it, automotive seam sealer, n a coat of paint.the gutters and roof are NOT rusty.
the sealant is missing or coming off
what is a good course of action to seal the gutters
dig out/remove old sealer and apply new?
what sealant to use?
This the stuff? https://www.amazon.com/550-Permanen...8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1Get a "stringer bead" wire wheel 4.5" or 7" Clean it out the old, wipe down with a wax/grease remover and lay in sealer.
I use 3M Dynatron
Jason
TT
This the stuff? https://www.amazon.com/550-Permanently-Fast-Skinning-Non-Staining-Non-Sagging/dp/B005RNFBMC/ref=sr_1_1_sspa?dib=eyJ2IjoiMSJ9.5-4J76lbYsksyf2q_sV0jDQl2CyjMVXv7RCyYvqj2zZP6E_-rDCBoeWUT8UcsIw033izhlt9_bfQ86z8pTtskORPe2pHzAZCtMRbRuhamyva3fHNMMFSpaYJ0MTELqjXgqg2R1rXADFOZglXQN7VVZhrs2u55CJIlLqX28fqqexkarXrlLpj5WFkbfqCiLsVABRyKOeNIxBbH4k1RUtBbbXlf--pG2fStDxaaEk7rwuOfAOB329EOJ0311Q7cLErLlPWSZxtUgR8iahVSghGSA_-h_UTOoQGxJazGcFznSY._KRpjAvUzvU26rpvtSsMLgHo8pYgr80yzIq1aJAcG0o&dib_tag=se&hvadid=580840085641&hvdev=c&hvlocphy=9033789&hvnetw=g&hvqmt=e&hvrand=608287547679691796&hvtargid=kwd-1081731104636&hydadcr=4787_13196991&keywords=3m+dynatron+auto+seam+sealer&qid=1711215918&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1
What are you using to get into the narrow gutter space on the A pillars? Same stuff with a narrow tip or something with a lower viscosity that can flow down them easier?