I will guess that the seats in the '18 are the same as '16-'17 and if you are looking at an '18 with the rear screen option, you will be able to use these covers just fine. Note that starting in '18, the rear screens were optional, so unless you know for sure the one you're looking at has them, it might not.
Rear-seat Video Screen Removal Question
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
It most certainly does. Saw photos. Just wanted to confirm that mounting was the same since these are listed as “16-17” covers. Hopefully this next week we will fly up to Spokane to pick up the ‘18 and will promptly remove those screens. Kids are all grown, so the simpler look is what I want.
Sounds like fun coming up! Let folks on Mud know you have the screens by putting them in the classified. Every so often someone needs one or two and mine sold within a couple of months.
TrekboxX
Supporting Vendor
As far as I know. Full refund if you have any issues!
So if any of these '18 screens need a new home my kids eyes are starting to bleed with the resolution on my '14's... Would love a PM.
I'm guessing they are plug and play?
I'm guessing they are plug and play?
As far as I know, the screens in question started with the '16 LC. At least the mounting arrangement did.
I just bought these from Trekboxx Expedition - he built them after seeing the issue on ih8mud, total game changer for me! 200 series Screen Delete Cover — TrekboxX Expedition Systems
I'm pulling mine out this weekend if you are interested.
TrekboxX
Supporting Vendor
Hey folks- just a heads up for any of you that missed it. We now carry the pre-2016 version. My understanding is that these screens were installed in the LX not the LC, but I can't confirm. I know in other countries some options came/went at different times than the US.
www.trekboxx.com
2013-2015 Screen Delete Cover — TrekboxX Expedition Systems
www.trekboxx.com
Hey folks- just a heads up for any of you that missed it. We now carry the pre-2016 version. My understanding is that these screens were installed in the LX not the LC, but I can't confirm. I know in other countries some options came/went at different times than the US.
2013-2015 Screen Delete Cover — TrekboxX Expedition Systems
Thanks for making these options! Bought a 19 LC today and this was the first thing I purchased!
I pulled mine out and have the two TV’s and 4 Bluetooth headsets. I’ve got them on eBay Land Cruiser Entertainment System TV | eBay I’ve seen them sell for over $2k, selling for $800
I realize this was a while ago I have a 2019 I don't know if it would work I don't even know if you still have the screen but just thought I would send you a message
thanks for your reply
I have a cracked screen and my kids use them frankly.
Would anyone be so kind to sell me one that they can taken off?
Just bought a 2016 LC and now getting the run around from the dealer about the repair they had agreed to prior to purchase.
Thanks!
Would anyone be so kind to sell me one that they can taken off?
Just bought a 2016 LC and now getting the run around from the dealer about the repair they had agreed to prior to purchase.
Thanks!
RET2
SILVER Star
Hopefully it was noted on a 'DUE BILL' and you can get them to honor their commitment.
I assume you've read through this thread and have seen that other members are now using much more versatile iPads instead? I don't know if anyone has the screens sitting around to sell, but you'll probably be able to get an iPad plus the headrest holder for less money.
I did get the repair to be made in writing.
I am just done playing phone tag with these guys.
Thanks.
My Kydex solution…
Took pretty much all day Saturday, so considering my opportunity cost and the price of 3D printing large parts, I think the commercially available options (TrekBoxx, for example) are a very good alternative despite the cost, and I think they look better
Anyway, here’s my solution:
Made a cardboard template, created a contoured wood form, shaped the kydex, and boom, done.
Took pretty much all day Saturday, so considering my opportunity cost and the price of 3D printing large parts, I think the commercially available options (TrekBoxx, for example) are a very good alternative despite the cost, and I think they look better
Anyway, here’s my solution:
Made a cardboard template, created a contoured wood form, shaped the kydex, and boom, done.
My screen delete covers:
Super nice. Where did you get those & what's that thing above it?
