I'm trying to take off the blown motor on my old Warn 5687 (Belleview) winch. I've printed and tried to follow the directions found here: http://www.ih8mud.com/tech/warn5687.php
I got the 2 long motor bolts out that go in through the other end of the motor, and I've tried tapping with a punch on the armature shaft. The motor spins freely and slides away form the winch housing by about a 1/4 inch, but won't go any further.
Am I missing something?
Thanks in advance,
Felix
I got the 2 long motor bolts out that go in through the other end of the motor, and I've tried tapping with a punch on the armature shaft. The motor spins freely and slides away form the winch housing by about a 1/4 inch, but won't go any further.
Am I missing something?
Thanks in advance,
Felix