Media Readers Rides, for pics and specs on your Toy(s). (2 Viewers)

[SCSPerformance]

my contribution.

Mods

2002 Tacoma TRD with ~238k miles

Exterior/Armor
- BAMF Kickup sliders
- Mercer frame reinforcement plates
- 17" FJ Steelies with 265/70/17
- 1.5" All-Pro wheel adapters

Suspension
- Eibach lift springs
- Bilstein 5100 front struts
- Bilstein 5150 8.5" rear shocks
- 2" Wheeler aal
- Wheeler rear extended brake line
- Toytec differential drop
- BAMF BPV bracket
- Energy Suspension 4.5" bump stop

Misc.
- Gray wire mod
- Diff. breather mod

 

[Dumpinthegutter]

Here's my Toyotas.

2011 Tundra CM. 4.5" lift, expedition one front and rear, on 35's

1991 Truck - 350 chevy 203/205 doubler, dana 60 & 14 bolt, on 42's

 

[Bigal87]

Hey guys great forum

here are a couple pics of my 85 4runner

 

[loserhick]

1986 Toyota Custom Cab

Well i seen allot of Toyota you see day to day and thought to myself well lets throw a wrench in this forum with my custom cab.
Well it started as i found it in the Washington state bush lol no craiglist. Guy sold it to me for 1000 but didn't realize it had 800 worth of parts in the bed. he told me to trash for him. so the truck was dead. i put a stroked out 22r into it and ran around on 33" tires at first. then my dad sold me the 35" BFG Km2 which are amazing. he made a father son deal that was kinda i couldn't not buy them or be a little slow in the head for the price. So 4" rough country indepent lift. Then i moved bases and with no gears took a 8hr drive to the next base into a 12hr drive. So on the look for gears i found a killer deal on front solid axle and rear gears and asui looker. the front axle had high steer done and gears with Detroit limited slip. The gear are 5.29. So i had a fab buddy in Idaho do the work and cut away the old set up and move my rear springs forward to the front and move the front axle position forward 3" and put 63" Chevy rear springs in the back. A total lift of 6" with 7" shackles. trail gear front and rear bumpers and 8000 pound winch. Which i never got stuck in my truck but blow the 22r up 1 mile past wal mart on the road going to pull a jeep out i mean a buddy lol and now have a 2.4ltr Toyota diesel my dads putting in for me while i am deployed. love my dad.
Hope you like my truck posting old blue pics of it and the new camo paint job in the pic shows i need bigger than 35 because bump stops crushed no wheels in wheel wells so looking for 38.
If you know how to turbo a toyota diesel plz pm me and if you have a none holy bed for the same year short bed pm and i can buy.
Thank you hope you like my truck/pride and joy.

 

[badgerjdub]

1986 Toyota 4X4

Just bought this from original owner with 74 K miles. Only mods to date are seats shown and an air horn. Lots of ideas ... little $$$!



Having issues with the carb (I assume) if anyone in the Denton area works on them or know someone who does.

 

[Foxsweep]

1982 Toyota 4x4 Shortbed
Original 22R with 106k miles
Factory working Air conditioning
4 speed transmission
Recent paint orig color match
Interior original, Seat recovered
31x10.50 15 Dunlop Mud Rover tires
15x8 Black procomp steel wheels
2nd owner... been non op in barn for the last 12 years
Great truck!

 

[85 t runner]

Foxsweep, boi is that a nice truck even still has the stock stereo in it , usually there taken out and hacked up

 

[cadot]

^^ nice truck fox. what color code do you have? i also have a beige color and my color code is 489.

here is mine again.

 

[Foxsweep]

Cadot... I think the code for my truck is 4A8... not sure

 

[Rattlewagon]

Couple new one of my truck. I mostly just lurk here...

 

[Ronmaster]

Hilux on 42-44"

My Hillux run on 42x14,5 MT/R kevlar on custom 17x14 wheels.

• 
  Koni front shocks.
  TJM rear shocks.
  TJM 26mm torsjon bar.
  3" Bodylift.
  4,56 giring.
  1KZ-T converions with intercooler and 3" down pip.
  R151F gear box.
  Islandic fenderflat for 44"
  
  
  Custum front bump.
  Custum side bar.
  Winch mont front and rear.

 

[HeadacheManNYC]

Picked this up to give my 80 series a rest after driving it cross country - loving it.

1988 standard cab 4x4
198k on original 22re
All original aside from the rims and CD player
No rust!

 

[crawyota]

Wow, it's been awhile since I've been here. My first post when I joined was on pg 9 of this thread . . . anyway, update pics:

last winter in PA (early 2010)


my wife outrunning the RV up hill (even though the 4runner has 4,000 pounds on the rear bumper in this pic)


Fins N Things, Moab Utah

hey was the first pic in or near Unionville Pa , I i think I know the road

 

[78wolverine]

New here!
'78 toyota wolverine
has the jeep dana 30 front axle and dana 20 transfer case.
20r power!
frame is shot (now lol oops) will be getting a swb frame and new springs and 35's or 37's

 

[22re]

Not much here besides some totally killer IFS flex







And of course some mud..

 

[sheepdawg]

Hooah

1992 toyota regular cab with V6 3.Slow named "Hooah" and used for mostly for trail exploration throughout the Sierras and Panamint Valley.

Modifications include SAS, 4.88 gears, Detriot rear , FJ80 reverse rotation 3rd member, ARB front. 35" BFGs, Allpro sliders, Badland custom front bumper and marlin rear bumper. Allpro interior roll cage and mastercraft seats. Powertank equipt.

NO cheap chinese **** gear from Trail Gear. Other than the truck, Made in USA.

Allpro Offroad actually built this rig when they first started doing conversions in the mid 90s.

"Hooah" doesn't get used too much now because I am married with two boys and it has only two seats. Wife and pushing me to sell because we now have an FJ60 for the family trail rig. But she has no right to tell me to sell because I owned it before I even met her.

 

[arndog123]

Nice mini and Cruiser.

 

[ThatwasPontus]

1980 4x4 Shorty

Bought it a little over a year ago with 6k on a top end rebuild of the 22R that was in it, new paint, fenders, etc... Nothing much since then, the L43 died in the spring and replaced it with a rebuilt L50. The rad had a rather dramatic blow out driving home for Thanksgiving the other night and so I get an extended long weekend waiting for a few parts stores to open. Since I've got access to a nice garage figure I'll knock a few more things off the list. All-Pro's transfer case parking brake is going on, as is a new 1" master cylinder in prep for rear discs. Steering stabilizer has been shot for ages. Going on a hunt for the short that keeps knocking out the dash fuse (suspect the fan motor is a culprit). Etc, etc....

 

[2ndGenToyotaFan]

That's so great! I have a magazine ad from 77 or 78 that shows a "Idea Truck" (I think) with locking hubs! I hope your build goes well, but I'm almost leaning towards you leaving it as it is, because I've never seen a pre-79 factory conversion till now... Seems like a rare beast.

New here!
'78 toyota wolverine
has the jeep dana 30 front axle and dana 20 transfer case.
20r power!
frame is shot (now lol oops) will be getting a swb frame and new springs and 35's or 37's

 

[Gun Runner 5]

My 1987 4Runner was first featured on post #518 but I decided to remove a few small dents and do a little painting. The rims will also be changed out later this week.