Post pictures of your hardcore sua rigs!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Not really what I would classify as truly "hardcore" but it was about as hardcore as I could make it with a full body and SUA.

5.5" Alcans, MAF u-bolt flips, shackle reversal, 37's

IM000030.jpg


craigschute-1.jpg


rubi_flex-1.jpg


IMG_1865.jpg


IMG_1968-1.jpg
 
That last picture ROCKS!

Nice build. Nice trail. SWEET pic!

~ Ben
 
Older SUA pics - clean shot on 37 MTRs, then with siped 38.5 TSL SX's - using removable fiberglass front fenders, No slip in rear, ARB front, sagging 4" soft ride springs and 2" over stock shackles, fuel injected with DUI, SM420 with stock case and 4:10's, u-bolt flip kits, double beadlocks. Older shot of middle line on Slick Rock. Kind of missing it being like that...
SUA-Old-37-MTR.webp
SUA-Old-385-Beadlocks.webp
SUA-Old-385-Slick-Rock.webp
 
My BJ74 on 33" BFG muds.
Shackle reversal, removal of leaves f+r and extended shackles at rear.
Open diffs, installing a lockright at rear in near future.
Roll cage,rock sliders, intercooled, straight through xhaust ending infront of rear tyre.

robertson_20001.jpg


robertson_20020.jpg


dscf1741.jpg


cruiser_flex.jpg


Shackle convertion, std mounting pionts used and diff moved fwd.
dscf1748.jpg


_cid_xhaust.jpg
 
Last edited:
If thats not Hardcore than I would love to see some of your hardcore pics. Well done


Not really what I would classify as truly "hardcore" but it was about as hardcore as I could make it with a full body and SUA.

5.5" Alcans, MAF u-bolt flips, shackle reversal, 37's

IM000030.jpg


craigschute-1.jpg


rubi_flex-1.jpg


IMG_1865.jpg


IMG_1968-1.jpg
 
thought I would post a few pics of Marc Ritchie's BJ42
SUA 2.5" lift springs in the front and 4-link airbags in the back.
39.5" Iroks
trailer 061s.webp
imgp1259.webp
 
sua from today... but still hardcore...
attachment.php


attachment.php


attachment.php


will not run with 31s, got a set of 40x16/17 LTBs lying around that is going on my truck

And YES, they are volvo portal axles! :cheers:
 
Not too hardcore, but working on it. Won't be SUA for long, though. I have a set of 60 series springs for the rear and a set of 55 series springs for the front ready to go on top of the axles.

DSC_6346.jpg
 
Beautifull Hilux with those portals, wish we could get them here in South Africa.

74UA FJ, it looks quit neat on the sua with the beatlocks and 35", why change it ? Suppose you guys do a lot more hardcore wheeling that should be done ?
 
Beautifull Hilux with those portals, wish we could get them here in South Africa.

74UA FJ, it looks quit neat on the sua with the beatlocks and 35", why change it ? Suppose you guys do a lot more hardcore wheeling that should be done ?

Much better ride, better flex, easier wheeling, and a little bit longer wheelbase.
 
I like it more standard & stock then overly modified, mine is my daily driver, weekend wheeler and the odd competition entry. This middies is a very scarces thing in ZA, thus I like to keep it a classic.
 
X2 .. more pics ! ( have a thread of your build .? )

not aware of a build thread...

only other pics I could find are below:
calgury.webp
tubefender.webp
 
It may not be as hardcore as others, but the body is as tough as a tank.
fj1.jpg

fj4.jpg

fj2.jpg

fj3.jpg
 

Users who are viewing this thread

Back
Top Bottom