Registry Post Pics Of Your Modded 7x Series (2 Viewers)

[sputniknet]

Hi, everybody... just to introduce my self
Iv been fallowing this forum seem everyone's friendly and helpful,
will probably need advice.

 

[sputniknet]

here are some pictures..

 

[Z()LTAN]

Here is a new one of mine

 

[cruzerboy]

heres mine

 

[Z()LTAN]

awsome truck mate!!!!

 

[SuperCruiser]

Great rigs guys, be posting mine soon.

 

[Clint79]

2 vids of 75s
YouTube - landcruiser hj75
YouTube - landcruiser fj75 jump 1

 

[Z()LTAN]

2 vids of 75s
YouTube - landcruiser hj75
YouTube - landcruiser fj75 jump 1

The best way to bend a front diff housing...

 

[Clint79]

the front rim on the troopy bent around the front brake caliper haha and the back diff on the fj75 happened to bend and always breaking axel studs after but the front end have no bends or wobbles etc i lernt my lesson no jumps anymore lol

 

[TRAUTFEL]

Here is my rig....

 

[Rigpig]

Here's my junk! Don't get much time to work on it as i work out of town, but its never been closer!!! Specs are '85 BJ70 x-tenda cab chopped and stretched to 105" wheelbase, HJ60 front/60 FF rear with ARB's/4.88's. Labs hi-steer. Longfields and Polypro's in the rear. 3B turboed/intercooled. 38" SX's beadlocked/1.5" spacers. Rear 60 springs flipped&re-drilled up front/chevy 63's in the back. 8274's front/rear. Exo and paint on the way. I'll post some recent pics soon with crawlbox on the way.
Cheers!

 

[Clint79]

75

Not mine, but deleting the front indicator/ blinker in putting in a little one in the front guard looks pretty clean

 

[baroudeur73]

i put some pictures of my BJ 73 probleme . the frame is broken by the rust

 

[crushers]

umm, looks like that frame has been patched in the past...
you do have a problem.

 

[bj70_guy]

Here's my junk! Don't get much time to work on it as i work out of town, but its never been closer!!! Specs are '85 BJ70 x-tenda cab chopped and stretched to 105" wheelbase, HJ60 front/60 FF rear with ARB's/4.88's. Labs hi-steer. Longfields and Polypro's in the rear. 3B turboed/intercooled. 38" SX's beadlocked/1.5" spacers. Rear 60 springs flipped&re-drilled up front/chevy 63's in the back. 8274's front/rear. Exo and paint on the way. I'll post some recent pics soon with crawlbox on the way.
Cheers!

Wow, that's VERY cool!

 

[lshobie]

Hi Guys, I just added some 50mm (2") spacers on the front coils of my 79, the OME coils has sagged it seems so I needed to get it back up a bit. My new PWR water/air intercooler is on its was as well as an albright winch solenoid and some other goodies.

The truck gets new paint in a month or so due to a botched paint job a couple of years ago.

Louis

 

[crushers]

it is amazing how fast our vehicles become money pits...
your truck looks good there Louis. i FINALLY got mine from Japan after buying it Dec/06, 2 1/2 years and 2.5 X the budget and more money to be invested.

cheers

 

[Clint79]

That 79 Louis is one tough looking truck and sounds tops on the vids what sort of rear springs are you using and how many leafs with the alloy tray?? Mine is pretty rough with a empty alloy tray, 3 dirt bikes on it then it rides like a gemof road

 

[lshobie]

Hi Wayne, thanks. Ya they are a money pit for sure, I still need to dump 20K into it to make it exactly as I want. So you finally got that truck, what are you going to do with it?

Clint, i have OME springs on it, I removed the long overload spring and a few leafs - I think I have 5 or 6 left in each pack. I might put one more back in though as when I put a load on it sags immediately, but it does ride ok - but always better with a load in it.

I'd like to convert to coils in the rear some day, more money.

Louis

 

[crushers]

not sure, at first i wanted to burn it. that thing has been frustration since i bought it
but
i took it for a drive and fell in love
so
i guess i will make it earn its keep... probably build a custom dump tray for the back and go from there.




coil rear would be nice for your truck...