Registry Post Pics Of Your Modded 7x Series (11 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Just put on a snorkel, is that modding enough for this thread? haha...
beach.webp
camp.webp
beach2.webp
 
Here is my cruiser ute (pickup) :

n690747288_1167196_795.jpg


It is 2008 model with 3,500km on the clock. Working on the mods, but so far is limited to the front bar and 315/75 (approx 35 x 12.5) on 16 x 10 inch rims.

Still messing aorund with the front bar, will make another permanent one and keep the one here for daily driving while the other one is being fabbed.

Also, most likely will end up with 2 x 240 and 2 x 170 lightforce lights, rather than the 4 x 170 as shown.
 
Nice, that new front clip is definately growing on me especially with that crappy stock front bumper removed.
 
don't know, with out the factory fromt bumper it is starting to look a lot like a 60 series...
 
Nice, I'll get one in a few years - I'd like the extra room in the engine bay for goodies.
 
FJ73

My fj73 73 series 85 model soa shackle reversal with (75 series ute rear springs not fitted in photo) hydro assist steering 36" tsl's f & r lockers 85% transfer reduction gears disc brake 75 series rear diff,diff guards strengthened cv's ,2 " wheel spacers 15 x 10" ,rims cut down into a ute with down ward opening tail gate. On there way are some 4.88 diff gears 15 x 10" alloy mags and 39.5 x 13.5 bias irok's.
Picture 023.webp
Picture 024.webp
 
Last edited:
My fj73 73 series 85 model soa shackle reversal with (75 series ute rear springs not fitted in photo) hydro assist steering 36" tsl's f & r lockers 85% transfer reduction gears disc brake 75 series rear diff,diff guards strengthened cv's ,2 " wheel spacers 15 x 10" ,rims cut down into a ute with down ward opening tail gate. On there way are some 4.88 diff gears 15 x 10" alloy mags and 39.5 x 13.5 bias irok's.

Very nice your 70....

¿what kind of reduction gear you have in your TC ? I need some information because i'm studing do the same.....
 
Last edited:
Nice, that new front clip is definately growing on me especially with that crappy stock front bumper removed.

The stock one sucks. It sticks out way too far. Proof below:

n690747288_1062075_6676.jpg
 
axehead thats a nice looking cruiser you got there. Def like it better without the stock bumper.
 
this is my hzj78 -01​

factory lockers
diesel heater
safarisnorkel
coilspacers
homemade winchbumper
255/85-16 BFG Mt
mickey thomson wheels




 
My Prado landcruiser with 1Kzte engine

This is my prado landcruiser with 140HP 1kxte engine during a savanne rally offroad event in the suriname rain forest
P1010905lowres.webp
 

Users who are viewing this thread

Back
Top Bottom