Builds Poppy- '84 FJ60

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Status
Not open for further replies.
Hey enough of that tail gate lid and get on those side panels....haha:D ...like that the panel has the lip support :beer: . What type of windows are those? where did they originate from? I didn't know they made those...would like to get a hold of a pair someday , very nice.
 
Jason, just offer the side panel storage on the left side. No need to mess with fuel connections. The left side already has the storage area without making any mods. Just a thought! Joe
 
JMJA said:
Jason, just offer the side panel storage on the left side. No need to mess with fuel connections. The left side already has the storage area without making any mods. Just a thought! Joe
Click to expand...


I'll have some more in depth plans in a couple more weeks. I'll be in the paint booth this weekend and for some reason things come to me while I paint....

J

56087d5b6ea5a36c210ca4853c7aeeff.jpg
 
Samson? That's an expensive couple parts there.
 
cruisermatt said:
Samson? That's an expensive couple parts there.
Click to expand...



Maybe expensive.... I can't remember if its the IN or EX valves that are NLA.. but I have 2 sets of each. Piston are still available IIRC, rings.. not sure.


I have a few cruisers I've never let you guys know about. I will be building these sooner than later and selling a couple as well.... Funny... I will load a complete car transport on this move to Spokane.


Samson - ('86) with 2FE, H55F, 4:11, FF rear, Harrop F & R lockers, 3" lift (mfg TBA- NOT OME), Cast metallic black
&
Delilah - ('87) on 100 chassis 2uzfe (maybe SC), 5 spd auto OE rear and Harrop front locker, IFS or SAS front- haven't decided yet. 3"-5" lift (w/ BL-- mfg TBA-NOT OME!) color TBD
&
NOT NAMED YET - ('87) 12HT, H55F, cable lockers F&R, 4:11s (Parts are on the slow ship from Netherlands now)
&
NOT NAMED YET - ('85) 3URFE w/SC and 6 spd auto (PENDING EVEN MORE MONEY FOR R&D with my electrical guys)
 
Holy chit!!! Quite a collection
 
12ht, 5 speed cable locked... That's the chit.
 
mongoose2231 said:
12ht, 5 speed cable locked... That's the chit.
Click to expand...

I had a chance to drive @Mr Tibbs 12HT and 5spd and loved it.

I got a fair deal on the 12HT w/all accessories, 173000KM, 5 spd and complete cable locked axles-- $6800.00 shipped to my door.

J
 
pistonpete said:
Dang man, why is it you have all the parts i need ?? :crybaby:
Click to expand...

Pete, I have a few guys scattered across the globe that are always on the look out for me now. South Africa, Australia, Austria, Netherlands, Dubai and Japan. Most of the time its not what I'm looking for but occasionally I get a diamond.

The guy in Dubai owns a custom restoration company. He bought 18K worth of armor for a clients 61 build from me last year. He is always running across interesting stuff. Most is out of my price range.

J
 
reevesci said:
Maybe expensive.... I can't remember if its the IN or EX valves that are NLA.. but I have 2 sets of each. Piston are still available IIRC, rings.. not sure.


I have a few cruisers I've never let you guys know about. I will be building these sooner than later and selling a couple as well.... Funny... I will load a complete car transport on this move to Spokane.


Samson - ('86) with 2FE, H55F, 4:11, FF rear, Harrop F & R lockers, 3" lift (mfg TBA- NOT OME), Cast metallic black
&
Delilah - ('87) on 100 chassis 2uzfe (maybe SC), 5 spd auto OE rear and Harrop front locker, IFS or SAS front- haven't decided yet. 3"-5" lift (w/ BL-- mfg TBA-NOT OME!) color TBD
&
NOT NAMED YET - ('87) 12HT, H55F, cable lockers F&R, 4:11s (Parts are on the slow ship from Netherlands now)
&
NOT NAMED YET - ('85) 3URFE w/SC and 6 spd auto (PENDING EVEN MORE MONEY FOR R&D with my electrical guys)
Click to expand...

WOAH!! I am turning green with jealously over here. Nice fleet, I can't wait to see the HJ61, what country did it originate from? That is great deal you got.
 
reevesci said:
I had a chance to drive @Mr Tibbs 12HT and 5spd and loved it.

I got a fair deal on the 12HT w/all accessories, 173000KM, 5 spd and complete cable locked axles-- $6800.00 shipped to my door.

J
Click to expand...
Whaaaa, that's an awesome deal
 
TLC Norway said:
heeeheee.... tell more about the one with 12ht!! What plans? cant wait to hear and see your plans, mate!

P
Click to expand...

P, That one is a year or so out. I'm thinking I will paint it a mottled dark orange, black, tan, yellow and white... similar to the background in my avatar logo.

Like I said, once I get moved I'm gonna get back to what I love doing. Don't get me wrong, I love building armor, but I'm going to start playing with builds again.

J
 
mongoose2231 said:
Whaaaa, that's an awesome deal
Click to expand...


Not too shabby. He has a few from 140-250KM. He owns a metal stamping business and buys the cruisers for the panels to make molds off of for the most part. I told him I would help him with money off the engines, transmissions, etc so he could keep buying cruisers to get good panels for R&D. ;)

No brainer there. He set up the shipping etc. and it was really reasonable, IMO. I had him break the motor, H55F and TC apart from each other and take all the accessories off the engine so it was a crate of "PARTS" instead of a complete engine... Too much customs BS paperwork. Plus, I want to tear them down and rebuild so I know what I or a client will be getting.
 
The 12H-T is an awesome motor. 20K miles with a lot of smiles thus far after swapping mine in!
 
Status
Not open for further replies.

Similar threads

O
84 FJ60 running little hot...
Replies
10
Views
1K
John McVicker
John McVicker
boerboel313
84 Fj60 EGR valve.
Replies
8
Views
1K
3_puppies
3
carlosfj80
City Racer Carb 84’ FJ60
2 3
Replies
55
Views
5K
carlosfj80
carlosfj80
84FJCruiser
Any tips for 84 FJ60 blower motor removal?
Replies
5
Views
791
84FJCruiser
84FJCruiser

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Share this page

Back
Top Bottom