TheGrrrrr
GOLD Star
Very much looking forward to getting this knocked out quickly.
Panhard drop bracket option? (2 Viewers)
- Thread starter montegofd3s
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #102
It will probably be added to his website here when he gets a chance…
eimkeith.com
Search: 6 results found for "PCK"
Good stuff for your Toyota. The original PCK® (Panhard Correction Kit) for 3rd, 4th, and 5th Gen 4Runners.
eimkeith.com
jkeithw
Supporting Vendor
It will probably be added to his website here when he gets a chance…
Search: 6 results found for "PCK"
Good stuff for your Toyota. The original PCK® (Panhard Correction Kit) for 3rd, 4th, and 5th Gen 4Runners.
indeed! - I'll add them to the site when I have them in hand and have verified fitment in real life. Hang tight!
afgman786
SILVER Star
jkeithw
Supporting Vendor
The wait is killing me. I see on your website you'll be at ATR though @eimkeith ... If you still need to test fitment I'll have the 200 there
The bend shop didn't finish the run by today's date, so I'll be picking them up on my way back from ATR - should be able to do a final fit verification pretty quickly when I have parts in-hand.
See you at the event!
Just checked the website and Keith has posted up the PCK!!! Can't wait to get this installed.
jkeithw
Supporting Vendor
Damn, you guys are quick! I JUST got them up on the site last night!
(pretty sure the first 3 orders were MUDfolk...!)
I JUST got them up on the site last night!(pretty sure the first 3 orders were MUDfolk...!)
jkeithw
Supporting Vendor
jkeithw
Supporting Vendor
Just this crappy dark one that I’ve tried to lighten up here: (I'll need to get a 200 back in the shop for better pics)
afgman786
SILVER Star
Ordered! Looking forward to finally fixing the rear end geometry
jkeithw
Supporting Vendor
Thank you guys!
Does the nut get welded to the backside of the bracket?
jkeithw
Supporting Vendor
It occurred to me that the nut might be tight to the spring on the upper hole - if that's the case, let me know and I'll send out jam nuts for extra clearance (both the 80 and 100 series have to use narrow nuts because of the proximity of the spring, don't recall the 200 being that close but now I'm second-guessing myself)
jkeithw
Supporting Vendor
one certainly could, but then you'd need another nut to change the bar position.
