Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
In North America it’s kind-of been dead since 1987.
Ok - going complete dork mode. I am ordering a second pair of the chinese LED so I can get a third light. Let me know if anyone wants the other one. It will have red ring.Totally useless question of the day - why is it that more mericans don't run the third round light like the aussies?
View attachment 2046475
View attachment 2046478
I'll just leave this right here....Ok - going complete dork mode. I am ordering a second pair of the chinese LED so I can get a third light. Let me know if anyone wants the other one. It will have red ring.
Thanks.I'll just leave this right here....
In the middle of doing front wheel bearings and new brakes on my LX470.
Anyone have a shop recommendation that could press in the new bearing races for me? Not wanting to fudge it up by trying to tap them in myself without the right tools.
Don't really have a shop recommendation but this works for me
Bearing Race and Seal Driver
I haven’t used them personally myself on a 100 series. But they fit my 80 perfect doing them. Don’t know the difference between the two In size but I figure there not much different. Have to have someone that’s done them on a 100 before give some info about itI was at HF earlier today grabbing a popup tent they had on sale and didn't even think to look for these...Have you used these on a 100 series? I've read mixed reviews on these being large enough to fit properly.
![]()
Front Wheel Bearing Race Install
I'm in the process of putting everything back together after tearing down and inspecting my front wheel bearings and races (there was some contamination on the DS due to a bent oil seal so I decided to hammer out the races to get everything 100% clean). I started with the larger inner race and...forum.ih8mud.com
In the middle of doing front wheel bearings and new brakes on my LX470.
Anyone have a shop recommendation that could press in the new bearing races for me? Not wanting to fudge it up by trying to tap them in myself without the right tools.
View attachment 2070811
Anyone else notice some sagging?