ONSC Chat (30 Viewers)
- Thread starter NCFJ
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
slceso
... pronounced "Jason"
pretty sure they were under $6 in a 2 pack last time I was at wally world, even though their site doesn't say so.
Stopped by Arc3 in Durham today to refill my welding gas. They were out of 80 cu.ft. so he upgraded me to a 160 cu.ft. for free.
If you have an 80 tank, today might be a good time to swap it.
If you have an 80 tank, today might be a good time to swap it.
What cruiser related stuff is in your office?
Moved to a knew office recently and am starting to fill it up with wall art and things. Just about the only cruiser related stuff I still have is now in the office.
I know others have similar things in their office @erymer @GarnerFJ40 @GLTHFJ60 @mtweller ???
Moved to a knew office recently and am starting to fill it up with wall art and things. Just about the only cruiser related stuff I still have is now in the office.
I know others have similar things in their office @erymer @GarnerFJ40 @GLTHFJ60 @mtweller ???
Great pictures and LC stuff.
What cruiser related stuff is in your office?
Moved to a knew office recently and am starting to fill it up with wall art and things. Just about the only cruiser related stuff I still have is now in the office.
I know others have similar things in their office @erymer @GarnerFJ40 @GLTHFJ60 @mtweller ???
Well - 2 problems for me.... it was over 9 years since I had an office... cube land didn't lend itself to all these goodies. And, for the last year or so I work from home full-time.
Really digging the article mounting and the pics on canvas. Who did you use for those?
R
Well - 2 problems for me.... it was over 9 years since I had an office... cube land didn't lend itself to all these goodies. And, for the last year or so I work from home full-time.
Really digging the article mounting and the pics on canvas. Who did you use for those?
Not sure my sister did it for me as a christmas present years ago. I'll ask her
lumbee1
Native American
I've got a collection going of empty 1lb canisters. I fill up my 20lb at Costco for $7 and then fill the 1lb canisters at home.
Amazon.com : DozyAnt Universal Safest Disposable Propane Bottle Refill Adapter- 100% Solid Brass Regulator Valve Accessory for all 1 LB Tank Small Cylinders : Patio, Lawn & Garden
lumbee1
Native American
I am getting Lseat covers for the front seats. I can't afford to do the rear seats yet. I will also be doing all the work myself.
BTW, is there a conversion kit for power to manual seats for the 80? I am not replacing any more seat gears. My passenger seat is dead again.
slceso
... pronounced "Jason"
$7! That's awesome. So miss the Costco. I also refill with that same adapter. Here's the Cadillac version so you don't get pinched by the "propane tank refilling enforcement agency."
Flame King YSN1LBKT Refillable 1 lb Propane Cylinder with Propane Refill Adapter and Propane Tank Refill Stand Amazon.com : Flame King YSN1LBKT Refillable 1 lb Propane Cylinder with Propane Refill Adapter and Propane Tank Refill Stand : Patio, Lawn & Garden
lumbee1
Native American
Very nice! That's much better than mine. I set my 20lb on the side of my welding table and connect the 1lb to the adapter. Accessing the schrader valve to get a full pound is a bear.
I had a good experience with lseat. Im going to use them again to do my seats i have now. Theres a seat thread on mud where i posted pictures when I installed them.
slceso
... pronounced "Jason"
I line it up so that the schrader is at 6 o'clock when charging (20lb upside down on work bench or tailgate), then shut off the valve, flip 20lb upright with everything still connected and vent, flip back, charge some more.
jfz80
Cruisin’
Theres a 40 page thread in 80 tech
No conversion "kit" to speak of but you skipped a bunch of details. Oem power to oem manual is direct swap if you get the rails with each.
There are a couple mounting adapters to make it easier to adapt other brands seats to our trucks. Planted tech, wedge,and corbeau are first that come to mind, think there is another.
Cruiser stuff on my desk...
Issue 01 (but have 01-06 at home) and a TT.
Spotted on my commute home last night.
Yellow sign on rear window says "KIDS UP IN THIS B!TCH"
Issue 01 (but have 01-06 at home) and a TT.
Spotted on my commute home last night.
Yellow sign on rear window says "KIDS UP IN THIS B!TCH"
I wouldn't use Wedge again. The powder coat was already chipping when I installed them and the brackets looked like something built in sombodies garage. The planted tech looks pretty clean though.
Anyone in Raleigh coming to GSO any time soon wanna do me a big favor?
There's beer and high fives in it for you!
There's beer and high fives in it for you!
Anyone in Raleigh coming to GSO any time soon wanna do me a big favor?
There's beer and high fives in it for you!
What's your timeframe? I have to head out that way.
slceso
... pronounced "Jason"
@lumbee1
Powder coating At Home Is Cheap and Easy.
Powder coating At Home Is Cheap and Easy. • r/DIY
Powder coating At Home Is Cheap and Easy.
Powder coating At Home Is Cheap and Easy. • r/DIY
