Does it take premium or regular?
Official ONSC member buying/selling thread (15 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Takes whatever I give it and moves along. Owners manual calls for 91.
Stand Alone Vortec 5.3 computer, diagnostic module, and harness for sale
This harness and standalone computer came with a Turnkey aluminum 5.3 back in 2011. The engine developed a crack between cylinders 5 and 7 a year ago and was swapped out with an Iron block replacement. I was told that the harness was built by Howell Engine Development, and the standalone computer is not programmable. Included in the sale is a Techmate Pro diagnostic reader ($500 value).(TechMate Pro marine diagnostic tool, marine code reader)
Asking $150 or best offer for all parts.
SeriesLR(at)gmail(dot)c0m
SOLD!
Next up on the garage clean out/up....
I'm beginning to work through tying up loose ends on the 45 for an eventual transfer to new ownership (yeah, I'm getting old-er).
I figure the desirability factor would probably go up a few points with a tall skinny tire on a stock rim with hubcap, sooo.......
I have five 35x12.50R17LT (Load Range D) BFG KM2 on Trail Ready Beadlock with 6-5.5 pattern for sale. Tires all measure around 16/32nds and have a date code of 4312. No rips, splits, or plugs. All wear is straight and true. Beadlocks are TR part number HD17 measuring 17x8.5 with 3.5 inch back spacing. Bolt pattern is 6-5.5. Beadlock rings have a few small scratches/rock rash, but not bad at all. (Trailready TR Beadlock HD17)
Asking $2000 or best offer for all 5. Located in the Charlotte area.
SeriesLR(at)gmail(d0T)com
Next up on the garage clean out/up....
I'm beginning to work through tying up loose ends on the 45 for an eventual transfer to new ownership (yeah, I'm getting old-er).
I figure the desirability factor would probably go up a few points with a tall skinny tire on a stock rim with hubcap, sooo.......
I have five 35x12.50R17LT (Load Range D) BFG KM2 on Trail Ready Beadlock with 6-5.5 pattern for sale. Tires all measure around 16/32nds and have a date code of 4312. No rips, splits, or plugs. All wear is straight and true. Beadlocks are TR part number HD17 measuring 17x8.5 with 3.5 inch back spacing. Bolt pattern is 6-5.5. Beadlock rings have a few small scratches/rock rash, but not bad at all. (Trailready TR Beadlock HD17)
Asking $2000 or best offer for all 5. Located in the Charlotte area.
SeriesLR(at)gmail(d0T)com
Last edited:
I will be interested on the wheels and i have a set of factory 40 wheels is you are interested on parcial trade.
Second in line for the wheels.
Anyone have a full set of 80 series lancruiser (not lx) locks with a key? Daughter's lx drivers door lock threw a pin, and is inop.
May look at converting to the lc keyed set for her truck as an option.
Doors, ignition, hatch, and glovebox.
Would settle for a drivers side lock and key as a solution as well.
May look at converting to the lc keyed set for her truck as an option.
Doors, ignition, hatch, and glovebox.
Would settle for a drivers side lock and key as a solution as well.
I need all 4 doors and the passenger rear quarter panel if you're going to have body parts.
Swap the DS tumbler for the PS. An old school locksmith, maybe even a new one, should be able to repair the bad tumbler.
Malleus
Far west of Siegen
Eastway Lock & Key has done this for me. They were able to look up the specs to restore a door lock, the ignition cylinder and cut a key (I gave them a blank), with no trouble at all.
jfz80
Cruisin’
I should have those here used but working condition. Drivers door tumbler was stiff but operational. Key fairly worn. Have a Fob too if it matters.
Not only did the furthest in pin or pins get jacked in it, one side of the c clip tabs broke too. The pins keep the key from going in all the way, and won't let you pull the assembly apart. It wasn't for lack of tryin, that's for sure
Ill talk to her and let you know. She's OK with using two keys if she has to, like the old GM keys.
Keep
GOLD Star
FREE STUFF!
Cleaning out the basement. To my knowledge everything works... and everything's free if you pick it up in Chapel Hill.
FJ Cruiser - 1 dusty but working JL Audio Stealthbox
FJ Cruiser - Nearly new OEM Airbox and intake parts, pulled off my long since sold 2014 when I installed TRD parts.
Tundra - Factory set of headlights off my 2015
70 Series grille off a 1996 73.
Aisan Carb off a 1978 FJ55. Worked, but can't claim it worked well, converted to a Sniper
More to come...
Cleaning out the basement. To my knowledge everything works... and everything's free if you pick it up in Chapel Hill.
FJ Cruiser - Nearly new OEM Airbox and intake parts, pulled off my long since sold 2014 when I installed TRD parts.
70 Series grille off a 1996 73.
Aisan Carb off a 1978 FJ55. Worked, but can't claim it worked well, converted to a Sniper
More to come...
Last edited:
I would like the JL Audio speaker. Thanks!
I would like the Tundra lights and 70 series grill.
I’d like the carburetor. PM sent.
40LandCruising
Anderson
Anyone have an FJ60 front axle housing they'd part with? I'll take more but I really just need a housing and figured it would be the cheaper route.
I wanna put a 60 axle in my 40 and I already have everything but the housing. I'm going keyed mini truck knuckles, reusing the locked diff out of my 40, and reusing the long fields out of my 40 and ordered a new long side inner shaft to make them work in a 60 housing.
I wanna put a 60 axle in my 40 and I already have everything but the housing. I'm going keyed mini truck knuckles, reusing the locked diff out of my 40, and reusing the long fields out of my 40 and ordered a new long side inner shaft to make them work in a 60 housing.
Keep
GOLD Star
The parts purge continues... All for pickup in Chapel Hill.
Pair of new Hella H4 conversion 7" headlights and bulbs. $50
Pair of old but perfectly good RoundEyes 7" headlights: Free
ARB Portable Air Compressor (CKMP12). Never used: $200
Set of 4 dusty but otherwise flawless unused 15" Toyota steel Wheels and Hubcaps: $400
Pair of new Hella H4 conversion 7" headlights and bulbs. $50
ARB Portable Air Compressor (CKMP12). Never used: $200
Set of 4 dusty but otherwise flawless unused 15" Toyota steel Wheels and Hubcaps: $400
Last edited:
I have a 62.
