Official ONSC member buying/selling thread (14 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Few things for FREE. . Nothing special

80 series stock 4.10 ratio gears (front and rear. Not sure whats missing if anything)

Charcoal Canister. Needs to be opened and cleaned out for no HISS

Stock Front/Rear coil spring dampers

Also a Eezi-Awn 1000/2000 Series Awning Brackets - By Front Runner (whenever I can find it in the garage).

20201010_122941.jpg


20201010_122949.jpg


20201010_124744_HDR.jpg
 
Few things for FREE. . Nothing special

80 series stock 4.10 ratio gears (front and rear. Not sure whats missing if anything)

Charcoal Canister. Needs to be opened and cleaned out for no HISS

Stock Front/Rear coil spring dampers

Also a Eezi-Awn 1000/2000 Series Awning Brackets - By Front Runner (whenever I can find it in the garage).

View attachment 2583922

View attachment 2583923

View attachment 2583924
How are you driving without a R/P set?

Damn! I was sure I was going to make page 1000:bang:
 
Do you know the backspacing on these ?

SPECIFICATIONS​

  • Size: 16 x 8
  • Bolt Pattern: 6 on 5.5
  • Finish: Flat Black
  • Offset: -12
  • Backspace: 4
  • Max Load: 2200 lbs
 
80 series front axle hub to hub. Might have brakes but not sure. Came off of Jerry’s old 80 when he swapped in locked axles. $300 obo

Set of tons. Chevy CC chassis so narrow wms. 60 front 14 bolt rear. Will need to confirm gears but they are thick cut. Rollers mounted. $1200 obo
 
Last edited:
80 series front axle hub to hub. Might have brakes but not sure. Came off of Jerry’s old 80 when he swapped in locked axles. $300 obo

Set of tons. Chevy CC chassis so narrow wms. 60 front 14 bolt rear. Will need to confirm gears but they are thick cut. Rollers mounted. $1200 obo
I don't need those wontons, but I want them. What is the 60 out of? D60s didn't come in cab and chassis configs AFAIK, only srw and drw
 
80 series front axle hub to hub. Might have brakes but not sure. Came off of Jerry’s old 80 when he swapped in locked axles. $300 obo

Set of tons. Chevy CC chassis so narrow wms. 60 front 14 bolt rear. Will need to confirm gears but they are thick cut. Rollers mounted. $1200 obo

80 axle and chevy 60 / 14 bolt is still available!! @GLTHFJ60 got rational and remembered he already has tons under Moonshine and therefore has no use for these...the appeal of the deal lured him in :smokin:
 
Last edited:
Hey all - anyone have front speaker grilles laying around? in oak for an FZJ80L. Thanks
 
Both of these items (80 axle and chevy 60 / 14 bolt) are still available!! @GLTHFJ60 got rational and remembered he already has tons under Moonshine and therefore has no use for these...the appeal of the deal lured him in :smokin:
@AJR dont you need these so you can pass those hellfire knuckles my way?? If I wasn’t scheming a plan of my own right now I’d be on my way to get those wontons this weekend.
 
Believe me, it’s tempting
Let’s sweeten this deal...

For 1350 you can get the tons AND the 80 series front axle PLUS the chance to pilfer through my storage unit for those HF parts!

But...you can pilfer whenever...just trying to enable the deal :hillbilly:
 
Let’s sweeten this deal...

For 1350 you can get the tons AND the 80 series front axle PLUS the chance to pilfer through my storage unit for those HF parts!

But...you can pilfer whenever...just trying to enable the deal :hillbilly:
If you still have this stuff when I have time to get over there, I might do it. It's very tempting to sell my locked 80 axles, Longfields, and Hellfires and put the tons under Hatchet.
 

Users who are viewing this thread

  • Back
    Top Bottom