Official ONSC member buying/selling thread (48 Viewers)

[Rice]

There are 2 separate rigs (total of 3) he has. The red "FJ25" with no attached body and this FJ40. Remember the FJ25 had some fuggly signals on it from a 70 series and many other issues. He also has an FJ45 at his house now.

Buyers beware (Something I'm being reminded of first hand!)

 

[pawwright]

↑
I don't even need one but want it.

I have this exact same thought while browsing CList daily (hourly)

Hahaha.... me too, at least with this bike.

 

[NCNole]

Anybody interested in a vintage Kawasaki F7 175? (Not sure of the year. Maybe '73). I did some work to the bike recently (carb rebuild) and the owner contacted me yesterday asking if I knew anyone who might want it. He just never rides it and he doesn't like it sitting. Neat old bike. It's a two stroke. Oil injection so premixed fuel is not needed. Asking $500.
View attachment 1307616
View attachment 1307618
View attachment 1307621
The bike is located near Charlotte.

If I hadn't just bought a bike....

 

[greenseaman]

I've got a lot of driveline slop in the rear end of my '85 4runner and think I may need a new ring and pinion. The third is out of a '94 V6 minitruck with a Detroit Locker. I'm hoping the locker is still good. I know it's a long shot but does anyone have a set of 4.88 R&P with an install kit or know where to find a good set cheap? I would also consider a complete locked third member with 4.88s. Message me if you have anything! I need to get it ready for Logan's Run!

 

[roadstr6]

If I hadn't just bought a bike....

I believe the bike is sold now to a fellow ONSCer! Thanks everyone for your interest. If things change and the deal is not made I will let everyone know.

@NCNole Bikes are like rabbits. You take one and park it in the garage and a few weeks later you look in there and there are six of them...at least that has been my experience. They are fun to collect because they don't take up much space and each one has its specific purpose. Enjoy your new ride! Stay safe and watch out for cages.

 

[NCFJ]

Bikes instead of trucks, Great idea!!! I can get an apartment

 

[Rice]

Bikes instead of trucks, Great idea!!! I can get an apartment

Equation doesn't work that way. Total space remains constant, number of vehicles increases.

 

[Rice]

1992 TOYOTA LAND CRUISER 4x4, cold air, third row seat!!!!!!!!!!!!!!!!

 

[roadstr6]

I think the ratio is something like 8:1. Judging by just what I see in the picture you should replace those 7 trucks with 56 bikes give or take.

 

[Rice]

For the Healey fans here:

1959 Austin Healey Bugeye Sprite

 

[NCFJ]

Damn Rice, I did not need to see that. I had a 68 and 69 in my youth

 

[Rice]

Damn Rice, I did not need to see that. I had a 68 and 69 in my youth

True, the Healey will eat into your motorcycle numbers. Sorry man.

 

[NCFJ]

LOL, no bikes in my future. Nor a Healey for that matter. If I were to go for a Healey I'd build a kit of the 3000.

 

[Rice]

LOL, no bikes in my future. Nor a Healey for that matter. If I were to go for a Healey I'd built a kit of the 3000.

Ahh. Where Healey's go to live:

 

[weejub]

Free - unopened - little more than a year old:

 

[weejub]

Highest priced truck in Greensboro:

1995 dodge rollback V-10

 

[angerhater]

Jamie, I will take that oil.. are you coming to Logans run?

 

[weejub]

Yes sir - we will bring with. Thanks

 

[GarnerFJ40]

I've got a lot of driveline slop in the rear end of my '85 4runner and think I may need a new ring and pinion. The third is out of a '94 V6 minitruck with a Detroit Locker. I'm hoping the locker is still good. I know it's a long shot but does anyone have a set of 4.88 R&P with an install kit or know where to find a good set cheap? I would also consider a complete locked third member with 4.88s. Message me if you have anything! I need to get it ready for Logan's Run!

If your locker isn't good, I've got an ARB you can swap it out with. I'll need to do some research on what application it is for.

 

[onemanarmy]

I've got a lot of driveline slop in the rear end of my '85 4runner and think I may need a new ring and pinion. The third is out of a '94 V6 minitruck with a Detroit Locker. I'm hoping the locker is still good. I know it's a long shot but does anyone have a set of 4.88 R&P with an install kit or know where to find a good set cheap? I would also consider a complete locked third member with 4.88s. Message me if you have anything! I need to get it ready for Logan's Run!

I'd call East Coast Gear Supply and have a chat. they do alot of Toyota thirds and just may have something laying around.