doughboy
SILVER Star
Official 35" and under!! Post pictures!!
- Thread starter land bruiser80
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Yokohama Geolander X-MT...35x17. Fantastic tire, under 10k miles no more noise then my past Duratracs. Now after 10k they are getting louder!
Great traction for what I needed them. Now switching to BFG KO3's
Great traction for what I needed them. Now switching to BFG KO3's
That looks great. I’ve been eyeing some KMC wheels with -38 offset to get the same look, but had some concerns about how they would fit under the fenders with my 2.5” lift when potentially wheeling.
I’m guessing you either get them to fit under the fenders or have a good look like this but not both.
NeverFinis
SILVER Star
Just got these wheels and tires. Black Rhino Kelso 18x9, -12mm offset., 285/75R18 BFGoodrich All-Terrain T/A KO3
I am not sure I am sold on the grey, but I didn't want an all black wheel.
I wanted the 18" rim so I could run a 285/75R18 tire. It is narrower than most 35" tires and is the stock size on the Ford F250/350 Tremor.
I am not sure I am sold on the grey, but I didn't want an all black wheel.
I wanted the 18" rim so I could run a 285/75R18 tire. It is narrower than most 35" tires and is the stock size on the Ford F250/350 Tremor.
275/85/17 Patagonia XT "34x10.5" but the tape measure says the treadblock is 9" wide.
Wheels are 17x8.5-10. Picked them up super cheap because of rock rash and refinished them. But they stick out slightly farther than ideal. Probaly +/-0 would be better. Surprised to see how well the tire fits in the factory spot though.
I think Ideally I'll come down in lift. Currently 3" Flexi which rides closer to 4"+
Been eyeballing the 1.75"
Wheels are 17x8.5-10. Picked them up super cheap because of rock rash and refinished them. But they stick out slightly farther than ideal. Probaly +/-0 would be better. Surprised to see how well the tire fits in the factory spot though.
I think Ideally I'll come down in lift. Currently 3" Flexi which rides closer to 4"+
Been eyeballing the 1.75"
Last edited:
Icon 3" lift with 315/75r16 patagonia mt2 and 16x8 -12 rough country steel wheels.
285s on Dobinson stock height and Tokicos.
OME J front and non-J rear springs. Toyo A/T 35x12.5
315/75/16 D-Tracs
Dobinsons 3" Heavy Lift
Dobinsons 3" Heavy Lift
315x75x16 Toyo AT3
2.5 inch lift with OME shocks and TJM springs
2.5 inch lift with OME shocks and TJM springs
Here is my 95 with Dobinson 1.5” lift springs, Fox 2.0s and kenda MT2 315/75/16 on Vision Soft 8 16x8 0 offset wheels. Recently added a winch and removed the front bumper.
JohnnyUtah2
SILVER Star
This thing is beautiful! Very well done. One of my favorites for sure! Would love to see more pictures.
Where did you get those side moldings? I thought theyre long discontinued for US models and originally came only on 97 year?
Original owner said they came on cruiser which I thought was odd also. Sorry couldn’t help any further!!
255/85-17 (34.6" if you want to split hairs) Mickey Thompson Baja Bosses on Sequoia wheels. Stock springs with 30mm Man-a-fre rear spacers and 1.5" Metaltech front spacers, and a 1" body lift. No rubbing at full stuff against the stock bumps, and an extremely compliant ride both on and off road.
I wanted to get a set of these, but found my Patagonias for $100/tire cheaper. How wide does the treadblock measure IRL? And how tall does the tire measure IRL? My tires that are supposed to be 275/85/17 (34x10.5). But in reality they are only 9" wide at the tread block. And with no air they measured 34" tall. But after putting them on 17x8.5" wheels they were taller than my 35x12.5 tires that I had previously measured to 34.6. What was supposed to get me more space in the garage, now has me barely fitting in the garage.
Over all though they are amazingly silent on the highway, and perform really well in rocks, dirt, and even slick mud so far.
Last edited:
I just measured my spare and I’m seeing exactly 8.625” tread block width and about 34.75” tall.I wanted to get a set of these, but found my Patagonias for $100/tire cheaper. How wide does the treadblock measure IRL? And how tall does the tire measure IRL? My tires that are supposed to be 275/85/17 (34x10.5). But in reality they are only 9" wide at the tread block. And with no air they measured 34" tall. But after putting them on 17x8.5" wheels they were taller than my 35x12.5 tires that I had previously measured to 34.6. What was supposed to get me more space in the garage, now has me barely fitting in the garage.
Over all though they are amazingly silent on the highway, and perform really well in rocks, dirt, and even slick mud so far.
