- Thread starter
- #21
That explains. Any issue / risk to leave it as is?Well, that is a picture of your front differential, but your driveshaft is in backwards. The slip yoke should be at the differential, not the transfer case.
The rear driveshaft should have the slip yoke at the transfer case.
In other words, the slip yoke should always be to the front of the vehicle.
Oh, and your knuckles are very dry.
There was a knuckle leak few months ago. Have replaced all the seals, gaskets and bearings. Had one pound moly grease each side. No more leaks now, but you're right, they do look dry, very little grease at the felt gasket when I touch it. Do I need to put more grease in?
Thank you