New gauges just came in!

[kchargis]

Here are some pics of the BTB cluster plate and autometer street rood gauges. I'm gonna try to get them in over the weekend.

 

[jibber]

Looks nizzzzze! Already hooked up the RPM gauge I see.

 

[PHAT MAX]

Already hooked up the RPM gauge I see.

yep, looks like he's got his 2f at WOT

 

[Colorado Boy-74-FJ40]

What did that set you back ? IYDMMA

 

[FJ40 MNTCRZR]

i like those, very clean ,,, how much $$

 

[kchargis]

Everything delivered was about $535. Not too bad, but still some $$$
BTB cluster, signal and high beam indicators ~$125
Auto meter gauges ~$410

 

[petescoffee]

I have the same set up. It looks great.
Dave

 

[FJFOOL]

I like the quad guage, makes a cleaner looking cluster. Nice !

 

[kchargis]

Petescoffee- Did you have the electronic speedo as well? I'm about to install them monday morning so I've been checking the install instructions and noticed something odd on the speedo. In the directions it shows where 2 wires (light and ground) should be installed in the top of the gauge, but in my set-up there is a cover of some sort. I tried to remove it with my hands with no luck and now am wondering if this is an updated model. My gauge does have the multiple blades in the bottom location. Do you recall this during your install?

 

[Cruisertime]

Looks like a great setup!!! I have been questioning those gauges and how they would look. Now I gotta tell the lady she is gonna be getting some new dash bling.

 

[redbone]

kchargis, where did you get that setup from|

 

[redbone]

kchargis, nevermind, I found it all.

 

[petescoffee]

Petescoffee- Did you have the electronic speedo as well? I'm about to install them monday morning so I've been checking the install instructions and noticed something odd on the speedo. In the directions it shows where 2 wires (light and ground) should be installed in the top of the gauge, but in my set-up there is a cover of some sort. I tried to remove it with my hands with no luck and now am wondering if this is an updated model. My gauge does have the multiple blades in the bottom location. Do you recall this during your install?

Sorry didn't see this until now. Yes I had an electronic speedo. I had to convert for the Orion HD which uses the Jeep? output. I actually had a friend install them though.
Here is the link:https://forum.ih8mud.com/hardcore-corner/173125-orion-hd-3-paging-peescoffee.html

Dave

 

[dallasryan]

If you have these installed, can you take a picture of them lit up at night? I am considering purchasing the same set but my eyes can be light sensitive at night.

Thanks

 

[mtweller]

my eyes can be light sensitive at night.

Thanks

You must love the stock cluster then!

 

[dallasryan]

That thing drives me nuts because the light is all in the wrong places. I can see in low light, I just hate shifting from bright to low and back. So I need gauges that I can read but are not to bright for me to switch from the road to the gauges and back. I am considering the cobalt series but i really like the quad gauge setup. I am adding WVO to my diesel so I need a fuel temp gauge and a second fuel gauge. So I figured if these were not to bright, I would just get a custom set with these two and 2 more gauges and then get 2 additional ones put on.

 

[CruisinMT]

man you are spoiled, all those nice shiny accurate gauges you've got there. Trust me you will miss guessing your fuel level and temp. JK looks awesome wish i had some coin for one of those.

 

[Santos]

Hi, I just bought the cluster but it did not come with the led lights. I called BTB, they told me to go find my own led/ lights. I tried two auto parts store and did not find anything. HELP. Where cAn I get some lights for signals and high beams.

 

[fieldsken1]

go to painless they are 9 dollars each

 

[Santos]

Thanks for the suggestion "fieldsken1", they have all kinds in there. I'm still curious as to the ones BTB uses, they fit very nicely in there.