Need help locating part # (1 Viewer)

[y2kc0wb0y]

Does anyone have an idea of the part# for this "mud flap" behind the drivers side rear splash shield? The part I'm looking for attaches to the splash guard and the side of the rear bumper. I reviewed several Toyota parts diagrams and I'm not having any luck locating it.
The best I can come up with is (EXTENSION, REAR FLOOR SIDE PANEL, REAR LH Part number: 5831760060)
but I'm not sure this is what supports part of the splash guard on the drivers side. Attached Passenger and Driver "mud flaps" for visual.
Appreciate any help

 

[y2kc0wb0y]

Bump - Anyone with Toyota microfiche access have an idea? I've looked at a few online parts databases and I'm not having any luck tracking this down.
I was hoping some has a full parts breakdown to look a little closer or link a better parts catalog.

 

[turbo8]

I'm not sure on the part number, maybe @bloc can help you out?

If you don't mind a used one, there will be a bunch available from other members in a couple weeks.

 

[bloc]

I'm not sure on the part number, maybe @bloc can help you out?

If you don't mind a used one, there will be a bunch available from other members in a couple weeks.

Yeah I’m not sure how to get more attention on the dedicated thread so I see these when they come up.

That said, I’ve been through all the body diagrams and don’t see this part.

@Y2K if you can pull the one on the other side and look for a ten digit number split in the middle with a hyphen that can help me narrow down where this thing is in the diagrams.

 

[y2kc0wb0y]

Yeah I’m not sure how to get more attention on the dedicated thread so I see these when they come up.

That said, I’ve been through all the body diagrams and don’t see this part.

@Y2K if you can pull the one on the other side and look for a ten digit number split in the middle with a hyphen that can help me narrow down where this thing is in the diagrams.

Great idea I will pull the other side and see if we can solve the mystery. THANK YOU

I'm not sure on the part number, maybe @bloc can help you out?

If you don't mind a used one, there will be a bunch available from other members in a couple weeks.

I don't mind used at all - That's ideal and will probably match better. I have a new splash guard as the original is ripped probably from lack of the support by this missing piece. THANK YOU

 

[turbo8]

Great idea I will pull the other side and see if we can solve the mystery. THANK YOU

I don't mind used at all - That's ideal and will probably match better. I have a new splash guard as the original is ripped probably from lack of the support by this missing piece. THANK YOU

Just ask in this thread as they will be removing that part for the bumper install.
E&E Low Profile Bumper! - https://forum.ih8mud.com/threads/e-e-low-profile-bumper.1344877/

 

[y2kc0wb0y]

@Y2K if you can pull the one on the other side and look for a ten digit number split in the middle with a hyphen that can help me narrow down where this thing is in the diagrams.

Finally got a minute to look at it. Thankfully enough space to swing a camera in there for a photo without removal.

 

[FerrisBueller]

Here's a photo of when I removed mine from the driver's side. The part number is visible on it. Mine is a 2018 LC, not sure if it stayed the same across those 10 model years.

 

[y2kc0wb0y]

Here's a photo of when I removed mine from the driver's side. The part number is visible on it. Mine is a 2018 LC, not sure if it stayed the same across those 10 model years.

Thanks - do you still have the piece and the hardware?

 

[FerrisBueller]

Thanks - do you still have the piece and the hardware?

I do. The cover is up there on top of my garage cabinets, and the hardware is somewhere in there in my spare hardware container

I can probably piece together what all the hardware looks like from the photos I took from that uninstall (see here).

I'd be happy to ship it to you for the cost of shipping. That's a standing offer I tend to post on here occasionally for the various parts I still have and have no chance of using.

 

[bloc]

Looks like the part number did change on the later model trucks.

@y2kc0wb0y yours should be 58724-60010

plus the screws are 90159-60496

 

[y2kc0wb0y]

I'd be happy to ship it to you for the cost of shipping. That's a standing offer I tend to post on here occasionally for the various parts I still have and have no chance of using.

Love the community on this forum. This is the second example of kindness extended to us as we work to re-condition this early 200. Thanks FerrisBueller looks like I'm on the hunt for a slightly different part. I'll see if I can reach out to some of the guys doing the bumper plate mod. Thanks again.

 

[y2kc0wb0y]

Looks like the part number did change on the later model trucks.

@y2kc0wb0y yours should be 58724-60010

plus the screws are 90159-60496

Thanks so much @bloc. Slowly but surely we're going to get this rig back in shape. #huge