- Thread starter
- #21
Chipping away at things while I wait for my new gears to arrive. I cleaned up my charcoal can and tested using the procedure in the FSM. Air was not flowing freely. I did the fix I found here on mud and sprayed a little carb cleaner in the tank and purge ports then alternated using pressure and vacuum to free up the valve. Worked great! Cleaned up the brackets and gave them a fresh coat of paint then reinstalled. I’ve got to replace all the fuel soft lines so if anyone has recommendations, I’m all ears! I also bench bled and installed a new brake master and dual diaphragm booster from city racer then plumed in some heater lines.