LS1 Camaro oil pan

[kling-on]

Camaro Engine Oil Pan Kit, Aluminum, For LS1, LS2 & LS6 Engines, 1967-1969


anyone used this pan??? Looks like it has good clearance I've been thinkin of stayin spring under and doin what I need to do to make the shaft work anyone runnin a LS1 oil pan want to post pics

 

[72rockcruiser]

Camaro Engine Oil Pan Kit, Aluminum, For LS1, LS2 & LS6 Engines, 1967-1969


anyone used this pan??? Looks like it has good clearance I've been thinkin of stayin spring under and doin what I need to do to make the shaft work anyone runnin a LS1 oil pan want to post pics

Good lS1 thread..may or may not have what you want...?

http://www.nc4x4.com/forums/showthread.php?t=39092&highlight=jims+garage

 

[CruisinFJ60]

thats a good write up on all them pans

 

[kling-on]

Good lS1 thread..may or may not have what you want...?

The "official" LS1/LSx/5.3/6.0 tech thread - North Carolina 4x4 Forum

NICE thanks I will call GM now

 

[brokenparts]

I know I dont check in here as often as I used to but how did I miss that you are swapping in an LS1 or are you just swapping a to ls1 oilpan?

 

[ferd69]

MANUCHAO is running one on his 5.3 I'm running one for my 6.0. I got mine from a 2004 Camaro F-body

 

[ElliottB]

I'm having trouble lining it up on my 2F. WTF?

 

[Spike Strip]

I'm having trouble lining it up on my 2F. WTF?

Lining what up ... Oil pan gasket ?

 

[ElliottB]

The camaro pan on my 2F.

Maybe I should enlist the help of the BFH.

 

[Spike Strip]

The camaro pan on my 2F.

Maybe I should enlist the help of the BFH.

Oh -- Didn't know a Camaro pan would fit .. Will it ? Does the pan have a skid ?

 

[ElliottB]

Sarcasm is not your first language.

 

[Spike Strip]

LOL !

That was a totally serious question. Really. At least that's what I got out of this thread... But maybe it's just the Turkey talkin' (T'giving dinner tonight, here at work )

I just wanna go lie down and snore.

 

[kling-on]

I know I dont check in here as often as I used to but how did I miss that you are swapping in an LS1 or are you just swapping a to ls1 oilpan?

My 5.3 truck pan hits the diff on the street so I need more clearance I was told the Camaro pan would do this .... and was hopin to hear more from others that it did and or see pics cause it aint cheap on a maybe... SOA and oil pan just to make the 4wd hook up again but its fast

 

[wngrog]

I switched mine out for a camaro pan on my 6.0 in the buggy. I highly recommend swapping.

 

[meatloaf]

My 5.3 truck pan hits the diff on the street so I need more clearance I was told the Camaro pan would do this .... and was hopin to hear more from others that it did and or see pics cause it aint cheap on a maybe... SOA and oil pan just to make the 4wd hook up again but its fast

Hey Kling-on, I had the original oil pan modified. Right after after the conversion, the pan was hitting the diff & started leaking, so I pulled it off and cut about a 1" wide X 4" long piece on the side it was hitting, put that same cut-off piece on the inside of the pan and had it tig welded. It does not look real pretty but it has worked and it was a lot cheaper than getting a new pan. I can send you a pic if you'd like.

ML

 

[kling-on]

i can send you a pic if you'd like.

Ml

i would love to see it

 

[meatloaf]

Here you go kling-on, if you need clearer pics let me know, I just took these and it is dark already.

Also, the way I did this, I dremmeled around and cut the piece out and put the same cut out piece on the inside of the pan and a friend welded and filled the rest. Like I said, it has held good.

ML

 

[kling-on]

Here you go kling-on, if you need clearer pics let me know, I just took these and it is dark already.

Also, the way I did this, I dremmeled around and cut the piece out and put the same cut out piece on the inside of the pan and a friend welded and filled the rest. Like I said, it has held good.

ML

do you have a front drive shaft ??? does it clear the pan ??... my yoke is hittin the pan as well

 

[CruisinFJ60]

MANUCHAO is running one on his 5.3 I'm running one for my 6.0. I got mine from a 2004 Camaro F-body

no such thing as an 04 F body camaro....

production ended in 02 then begun again this year (2009).

just sayin

 

[meatloaf]

do you have a front drive shaft ??? does it clear the pan ??... my yoke is hittin the pan as well

Yes I do and it fits fine other than the fact that it is a little short. My wagon has the Toyota 5 speed though- not sure if that makes a difference.