Local For Sale/Wanted Section!

[caz]

33" Mud Tires for sale - $200

All,

I got some new/larger shoes for the 40 (pics to come if the rain ever stops).

I am looking to get rid of my old tires. They are 33-12.50x15 Cooper mud tires. They are around 8 years old but most of the time were sitting on the truck while it was being restored.

They are in good shape and only have about 3000 miles on them but they do need a good cleaning. I am looking to get $200.

They are the tires pictured on my 40 here -

Thanks,
CAZ

 

[Lugboot]

Still Looking for a Hood and Upper Lift Gate

For an 80-series. Preferably 6M1 green. I have rust on the leading edge of the hood and the lift gate was repaired once by a PO and the rust is coming back. Would prefer to replace the panels rather than temporarily fix again.

Just keeping an eye out. If anyone knows of anything, please let me know.

Brett

 

[norville]

For an 80-series. Preferably 6M1 green. I have rust on the leading edge of the hood and the lift gate was repaired once by a PO and the rust is coming back. Would prefer to replace the panels rather than temporarily fix again.

Just keeping an eye out. If anyone knows of anything, please let me know.

Brett

Brett, I have a free upper lift gate in green for ya, just come and get it. If you the need, you can toss me a few brews. It's complete but not perfect. There is an small area where the emblem is/was/ that looks like it bubbled up at one time. PO cleaned it and spray it close. I have some pics around here maybe search my posts...

It's in Pa 18707

bob

 

[Lugboot]

Thanks--I'll look for the post. I think I remember seeing that, now that you mention it.

 

[kb3gun]

Anyone have a clutch slave mount they want to sell? Passenger side ('80-'84 / 4 speed). The one I have had been repaired at one time (the casting was welded), but it broke at the weld when I was remounting the cylinder.

Thanks! -Bill

Photo below was taken after sandblasting and painting it last year. Should have started looking for one then.

 

[kb3gun]

May have found one in Wilkes-Barre. Waiting on an email.
Found one. Thanks!

 

[crawlin40]

swap my 80 springs anyone interested in going shorter?

OK Here is the deal, I have OME stock hieght 80 springs and OEM Yota shocks on my rig for the the past year and a half/10k miles. I went with this set-up so that the rig could still fit in the garage as it used to be my wife's daily driver. Fast forward a year and a half. We bought a Sienna for my wife and I graciously took the 80 for my DD. Our garage has only one usable space in it and with 3 kids the chances of that other bay being cleaned out before 2025 is non existent. So the 80 can grow taller. I know it is rare but is anyone want to go smaller on their 80 and trade me your lifted springs? My rig did go up about 1" with the OME stock heights. But I am thinking 2-3 inch lift now. Even up trade or trade and cash would be great I just do not have $800-1200 to swap in a brand new set-up. PM me or drop me a line at crawlin40@hotmail.com
Thanks for looking,
Matt

 

[land cruiser kid]

Matt,
Forgive my stupidity but, what is a peg perego gaucho? Steve

 

[crawlin40]

Gaucho

Ride on toy that looks like an fj40, my son really wants to drive a "mudtruck" as he calls it.

 

[CJBury]

Save your cash and get a lift that will support 35's. Wish I did. 33's are ok but you will be dragging it over a lot of rocks. JM $.02

 

[land cruiser kid]

Matt,
I know Dave had one at his dad's garage but that was over a year ago. He wanted to know if I wanted it but my wife would have hit me over the head with it if I brought it home

 

[bkfj40]

I'm looking for a cheap set of 33" tires and rims...set of 4 or 5 for my cruiser...anyone have any that can bring them to Coal Miner?


bk

 

[Seattlemobile]

Any idea where I could find a radiator for my 1981 HJ 47 ? OEM not required, aftermarket is fine.

Thanks,

Seattlemobile

 

[caz]

Looking for intake manifold

Anyone have an intake manifold from '68-'74? I want a spare to have machined down to the thickness of my header flange. I suspect I don't have the best seal now.

Thanks,
CAZ

 

[jtaco1]

I think I may have one up at my parents, next time I am up there, I will look through the FJ40 parts.

 

[caz]

Thanks!

Let me know,
CAZ

I think I may have one up at my parents, next time I am up there, I will look through the FJ40 parts.

 

[Pytbool]

I am cleaning out a whole bunch of parts, more is coming. Help me unload some junk and make room!

40, 55, 60, and some miscellaneous stuff (5pt harnesses, chevy engine parts)

https://forum.ih8mud.com/sale-parts/292368-fj40-fj55-fj55-parts-sale.html

-Tyler

 

[caz]

Might be a little far away.....

motorized childrens jeep

My son (3) and I were looking through old pictures and he saw A photo I took of my red 40 now sold and said Daddy's mud truck, it's gone now (ouch), now we both like the 80 but is is not a 40.Though he still likes mud trucking in it! I have a 40 frame/semirolling chasis, thanks to Gary. But, I need a Peg Perego Gaucho to get by with my son's cruiser addiction, if anyone sees or has one, my son and I will appreciate it.

Thanks, M. Reed 610 6036861

 

[Lugboot]

80 for sale locally--used car lot

Just saw a 96 black 80 on the lot at Clear Choice Auto in Mechanicsburg. It has the chrome blingy package on the door handles and mirrors. I think they're asking way too much.

104K on the odometer, no lockers, factory roofrack and wind deflector installed, missing the 3rd row seats (seatbelts are there), some rust bubbles around the rear window, driver's seat and center armrest kinda beat.

They want $9000.

 

[caz]

95 4runner front end

All,

I am selling the parts off of the front of my 4runner. It was rear ended. The parts are in great shape - the fenders are RUST FREE. Hood included too - although not pictured.

Located in Lancaster, PA, $200 for everything needed to repair a front end - I still have the truck if the rad support is needed. I prefer not to ship, but can probably do it if necessary.

Included:
Bumper/valence with turn signals
Headlights
Marker lights
Grill
Fenders
AC condenser & dryer
AC electric fan
Hood latch
Hood