Local For Sale/Wanted Section! (4 Viewers)

[brian]

looking for some mid 70's warn hub parts.
some knuckle dragger tried to pass me on the left, while i was making a left turn on a side street in town.
damage seems to be limited to a scuff on the tire and a broken dial on the lock out hub.

 

[PAToyota]

Many years ago a friend's father had a somewhat similar situation. Waiting to make a left turn, when traffic cleared he turned and was t-boned. The woman coming up behind him said that she thought she could get around him before he made the turn...

 

[jamarquardt22]

Many years ago a friend's father had a somewhat similar situation. Waiting to make a left turn, when traffic cleared he turned and was t-boned. The woman coming up behind him said that she thought she could get around him before he made the turn...

That's nuts.

 

[plfj40]

4 stock shocks from 95 fj80. No leaks. Free . Delivered to CMCC

 

[ethingnow]

4 stock shocks from 95 fj80. No leaks. Free . Delivered to CMCC

View attachment 3349401

View attachment 3349402

Sent pm

 

[TheMU]

Hey folks, hope everyone is doing well.

Thinking about posting up my 1990 HDJ81 up for sale. I don't drive it often enough. I love it. But it's time to let go.
(I hope I dont regret it)

1HD-T 4.2L Turbo Diesel
A442F Auto Transmission
Asking price is $18K.
268XXX Kms.
Title is in hand.
Injector Pump, Injectors rebuilt at Fred Holmes Fuel Injection in CA, Dec 2021.
Timing Belt, Water Pump Belts done around the same time.
NEW Radiator, Fan Clutch, Auxiliary Belts.
Beaudesert Exhaust from Australia
6" Dobinsons lift
ARB front Bumper
4x4 Labe Rear Tire Carrier
Long Range America Aux Tank (42 Gal)
GTurbo Grunter Vortex Green.
Quad Headlight conversion (Morimoto Sealed4)
Starter and Alternator rebuil.
Bowfish Roof Rack
JDM Raguna 15x10 wheels with 33" BFG AT KO2s and matching spare.
JustRaceParts Australia Multi gauge.
Converted Speedometer Gauges from US Spec 80. (Speedo gear needs to change)


BEBs have not been done but never have had issues with it .
Also selling my 97 Prado as well.

 

[TheMU]

Also want to add:
Front Rotors and Calipers were upgraded to the late Model (95-97)
PDI Front Mount Intercooler
HOD Oil Catch Can
Birfields were replaced with Late Model, longer hub Flanges and Birfields.

 

[TheMU]

Also want to add:
Front Rotors and Calipers were upgraded to the late Model (95-97)
PDI Front Mount Intercooler
HOD Oil Catch Can
Birfields were replaced with Late Model, longer hub Flanges and Birfields.

I have the Seat brackets to add aftermarket seats, that I'll sell for and additional $300.

 

[FuglyYota]

I’m still looking out for a spare 6 lug wheel & tire for my FJ40 ahead of CCMC. I’m on 33’s now so anything in that size range would be fine. PM if you have anything, I can meet in/around Philly or at CCMC

 

[BenjisBus]

deleted

 

[Rics4rnr]

I am selling a set of Bilstein 5100 for a 3rd Generation 4runner. These are the front Tundra Struts 24261425 that have 4 positions of lift up to 2.5” on a 3rd Generation 4runner years 1996-2002. This comes with 3rd Gen 4runner Top Strut Plates with Sonoran Steel poly retainers for running the 1st Gen Tundra springs, and Suspension Max Extended Swaybar End links. Delivered to the CMCC

 

[crawlin40]

Wanted: Reliable vehicle for my son.
My son was rear ended, he is 100% ok. Car is being totaled. I am looking for something under $6500-$7000. He is a senior in HS and a welder by trade so car or truck or suv are all good. Toyotas take preference but your word collectively on MUD counts for something in my book, so let me know what you got. I will be at CMCC.
Remember when $6500 got you a running, inspected Land Cruiser with under 400k on it? Or in the case of Gary, 7/$500 fj60s' that could be parted out.....
I am located near Reading PA, zip 19510.
PM me, Thanks for any help.

 

[brian]

Wanted: Reliable vehicle for my son.
My son was rear ended, he is 100% ok. Car is being totaled. I am looking for something under $6500-$7000. He is a senior in HS and a welder by trade so car or truck or suv are all good. Toyotas take preference but your word collectively on MUD counts for something in my book, so let me know what you got. I will be at CMCC.
Remember when $6500 got you a running, inspected Land Cruiser with under 400k on it? Or in the case of Gary, 7/$500 fj60s' that could be parted out.....
I am located near Reading PA, zip 19510.
PM me, Thanks for any help.

yes, my 94 was 4500.

 

[dumkopf]

Hello PA Land Cruiser fam, I'm in Mid-michigan but looking for parts. Willing to meet or ship smaller stuff would be awesome!

I'm in need of the following:



front driver's side seatbelt in oak
Oh s*** handles screwhead caps
screws for 2nd row steps
intact '95-'97 flares, if you can get em without losing clips, and any associated hardware
any carpet mats in oak or weathertec
rebuilt power steering box

 

[FuglyYota]

Need one 6 lug 15x8 or so wheel as a spare. Needs to hold a 33x12.50. Anyone have anything?

 

[shmukster]

OK club members I am parting out Crusha's neat blue 96 80 series. I have listed a lot of parts from it on the various sections of MUD (axle, engine transmission, body) so check out those posts. I am listing a few items here on the club site as they are bigger items that I don't want to ship. Here goes: a set of nice KO2 all terrains size 315-75/16 on stock 80 series wheels. These are tall I'm guessing close to 35". Tons of tread on them and they all hold air without trouble. Wheels are not pretty. Complete with lug nuts take all four of them for $500.
ARB front bumper it has some rust here and there and one corner is bent a bit but it would be great for a truck that will be wheeled price $250. Right now there is a Warn winch bolted to it, winch looks good and has the controller, not sure what model it is but will find out. Full spool of steel cable on the winch drum but the hook is missing. Will take $400 for the winch. Buy the bumper with winch for $600
Rear bumper, has a swing out tire carrier and rear quarter guards. Has some rust on it but then again it would be great on a wheeler and is priced right at $275
This truck ran great until it broke at AOAA several years ago. On a bad spot in black trail the front control arms broke off the front axle due to rust. We (Crusha, me in my 40, and Gadget guy and his young sister in their 80 series) had a hell of a time getting the truck off that trail and then had to let it sit at AOAA overnight till Crusha came with his trailer the next day and we retrieved it. Been sitting outside his shop ever since. Best to email me shmukter@pa.metrocast.net I'd love to see these parts go to fellow club members

 

[brian]

Is it a cloth or leather interior?

 

[Sean9421]

OK club members I am parting out Crusha's neat blue 96 80 series. I have listed a lot of parts from it on the various sections of MUD (axle, engine transmission, body) so check out those posts. I am listing a few items here on the club site as they are bigger items that I don't want to ship. Here goes: a set of nice KO2 all terrains size 315-75/16 on stock 80 series wheels. These are tall I'm guessing close to 35". Tons of tread on them and they all hold air without trouble. Wheels are not pretty. Complete with lug nuts take all four of them for $500.
ARB front bumper it has some rust here and there and one corner is bent a bit but it would be great for a truck that will be wheeled price $250. Right now there is a Warn winch bolted to it, winch looks good and has the controller, not sure what model it is but will find out. Full spool of steel cable on the winch drum but the hook is missing. Will take $400 for the winch. Buy the bumper with winch for $600
Rear bumper, has a swing out tire carrier and rear quarter guards. Has some rust on it but then again it would be great on a wheeler and is priced right at $275
This truck ran great until it broke at AOAA several years ago. On a bad spot in black trail the front control arms broke off the front axle due to rust. We (Crusha, me in my 40, and Gadget guy and his young sister in their 80 series) had a hell of a time getting the truck off that trail and then had to let it sit at AOAA overnight till Crusha came with his trailer the next day and we retrieved it. Been sitting outside his shop ever since. Best to email me shmukter@pa.metrocast.net I'd love to see these parts go to fellow club members

Gary, hope all is well. I saw your post on the parts section and sent an email for a few things, I'd be interested in the bumpers as well if still available.

 

[shmukster]

Been overwhelmed with almost 80 responses and am a bit slow getting back to everyone. I forgot to mention this truck has a full OME lift. Yes it's not new but the truck rode and handled quite nicely. I will get some height measurements to give you an idea of how much lift is there. I'd sell all four springs and shocks for $275

 

[Sean9421]

Been overwhelmed with almost 80 responses and am a bit slow getting back to everyone. I forgot to mention this truck has a full OME lift. Yes it's not new but the truck rode and handled quite nicely. I will get some height measurements to give you an idea of how much lift is there. I'd sell all four springs and shocks for $275

I'd be interested in those as well if it's 4 inch or under.