Lift gate handle

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 18, 2018
Threads
4
Messages
33
Location
MI
Hi everyone. I have replaced my rusty lift gate handle with a new one (part number 69090-60020), and I am waiting for the plastic cover to arrive. I had to remove the plastic trim on the interior of the lift gate, and disassemble the mechanism (the metal posts and such). Now that I have put everything back together, the handle will not engage the mechanism and I cannot open the lift gate upwards. I have looked inside the mechanism and have gotten it to work intermittently, but every time I lock/unlock the central locking, it "resets" and the handle will swing but will not open the lift gate. (i could swear i put everything together correctly, because it all seems to fit back together in only one way). Prior to this, the handle was working fine and opening the door every time. Has anyone had this problem before? help please!
 
Slight, minor, thread drift here.

I'm about to replace the same part. I've done it on my two previous 100's.

I can't find any record of the part numbers for the two bolts that I need for PN 69090-60020. Nor can I find them by searching. Not close to a "local" dealership.

Anybody know what they are? Thanks very much.
 
I replaced mine recently. Once you verify you re attached all the little mechanisms correctly, ensure you didn't engage the child safety lock nub location between that handle in the locking mechanism. If it is engaged it kind of does what you have described. Also make sure you reconnected it so that it can be engaged and disengaged.
 
Hi everyone. I have replaced my rusty lift gate handle with a new one (part number 69090-60020), and I am waiting for the plastic cover to arrive. I had to remove the plastic trim on the interior of the lift gate, and disassemble the mechanism (the metal posts and such). Now that I have put everything back together, the handle will not engage the mechanism and I cannot open the lift gate upwards. I have looked inside the mechanism and have gotten it to work intermittently, but every time I lock/unlock the central locking, it "resets" and the handle will swing but will not open the lift gate. (i could swear i put everything together correctly, because it all seems to fit back together in only one way). Prior to this, the handle was working fine and opening the door every time. Has anyone had this problem before? help please!

I just did the same thing, and having the same issue.
 
I'd like to bump this up, and "revisit" it as I'm about to replace the rusted handle assembly on my 2003 100, and ai need to source the two bolts for the handle assembly { P/N 69090-60020 }.

I'd rather not make the trip to a dealer, hoping somebody has a part number for the bolts so that I can order them.

Thanks.
 
90119-06779 - 3 pcs
 
Just out of curiosity: Are you guys able to access this web page in the USA (with the diagrams showing properly), or is it banned?


1599257812488.png
 
  • Like
Reactions: uHu

Users who are viewing this thread

Back
Top Bottom