LC200 & LX570 Rear Tailgate Light Dual Colour LED **Updated** (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 30, 2014
Threads
4
Messages
166
I have been making these up for 200 Landcruisers in Australia and selling them.

I sell them for $190AUD in Australia if anyone is interested message us and I can post to USA to your location for 225AUD
Payments threw PayPal
Please PM and I will reply ASAP.

1x (Light Gray) Interior panel colour
Or
1x (Black) Interior panel colour

**Fits 200 Series Landcruiser and LX570 with electric rear lift up tailgate. Plug and plug into factory wiring No cutting, soldering or running extra wiring or fuses.
Install it yourself in under 2mins!!

**I also do kits for Non-electric rear door models with comprehensive step by step installation instructions.

**Update**
Dual colour LED
White and Amber now selectable via position switch.

Fused through factory vehicle wiring.

Blue illuminated push button switch.

Fitting Instructions provide with item

*Light times out after 20mins to prevent battery going flat if left open. Can be reset by simply opening and closing up liftup tailgate again

*Light switches on automatically when lift up tailgate is open and can be overridden so lift up tailgate is open and light is switched off



20190929_163429.jpg




20231113_224025.jpg


20231113_224106.jpg


Lc200 3.jpg


20241006_161443.jpg
 
Last edited:
Hi Brendan,
I would like to purchase one of those rear tail gate lights please. I have 2013 sahara this would be perfect. Thanks Wayne
 
I’m assuming that these only fit the US LX570, not the US Land Cruiser since the land cruiser doesn’t have the electric rear lift up tail gate like your specified.
 
Yes correct those models are a direct plug in.
However I do another kit that fits the non electric lift up tailgate, installation is a little more involved but the instructions cover everything for installation with pictures and everything needed for installation is supplied with the kit. Takes about 45mins only basic tools needed.

Kind regards
Brendan
 
Yes fits all 200 series electric lift up tailgates through to the current 2020
 
Yes correct those models are a direct plug in.
However I do another kit that fits the non electric lift up tailgate, installation is a little more involved but the instructions cover everything for installation with pictures and everything needed for installation is supplied with the kit. Takes about 45mins only basic tools needed.

Kind regards
Brendan
Can an electrical idiot like myself conquer such a task?
 
Yes correct those models are a direct plug in.
However I do another kit that fits the non electric lift up tailgate, installation is a little more involved but the instructions cover everything for installation with pictures and everything needed for installation is supplied with the kit. Takes about 45mins only basic tools needed.

Kind regards
Brendan

Thanks Brendan. I’m assuming that these ties to the hot wire that gets power without ignition being on, is that correct?
 
Yes no ignition or Acc on, operates same as the interior lights do
 
Hi Brendan,
I would like to purchase one of those rear tail gate lights please. I have 2013 sahara this would be perfect. Thanks Wayne
I’d like a black one for my 2016. How do we order?
 
Yes, for non electric lift up tailgate
I have made step by step instructions with pictures showing and explaining the whole installation takes about 45mins basic tools required
No soldering or ripping headliners down?
 
Or maybe the seller can post the instructions...
 
2016.... I am in if i can see the directions first....
 
Ok, there is two types of kits available depending on your model.
1. Direct plug in installation, for electric power assist electric lift up tailgate. 2min install time.

2. Non electric lift up tailgate, installation is a bit more involved requires the 4 window surrounds to me removed to run the cable and feeding the cable through the roof lining.
No soldering required and the roof lining does not need to be removed.
The installation instructions are provided with the sale of the light and are very comprehensive and have pictures of each step there is 19 pages to make very clear.
45mins roughly to install basic tools required long nose pliers, side cutters etc..
 
I love mine, I couldn't live without it. We've had it in our 2019 LX570 coming up on a year now, I use it every single day with no issues.


WP6OQEd.jpg

7Gn0c8S.jpg

OHV1Rv5.jpg

dOM1nqc.jpg

GQPizDx.jpg
 

Users who are viewing this thread

Back
Top Bottom