200 series Cargo Lights (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 18, 2024
Threads
6
Messages
39
Location
Utah
Trying to reinvent the wheel I guess. I wanted a cargo light that didn't stick out as much, so I ended up copying and 3d printing a factory replacement that is recessed near flush and has holes already clearanced and ready to go for the pod and button. I offered an initial run of these on a facebook group and refined and made a couple tweaks based off feedback, so here we are.

They are printed in Nylon so heat and any UV exposure is not a worry. I have not been able to find a tan or grey that I am happy with so for now black is the only panel color option.

The wiring plug and play for LX570 and power lift gate LC200s. Install time should take less than 5 mins if you have small hands (or access to such) to get to the lift gate plug behind the panel. Powered off the liftgate circuit, will automatically turn off when the gate closes or after 20 mins. While liftgate is open, can manually turn on/off as well. Due to the recessed pod, there is slight trimming needed behind the panel just to the edge of the plastic. Cannot be seen, does not need to be pretty. Can be done with dremel, razor, hot knife, etc.

Available options:
Led pod color - red or white
Led button backlighting - red or white

______________________________________________
Pricing: $85 USD shipped in the US, international is quoted separately as it can vary widely. PM to place an order, or you can do so via my Etsy storefront, which has a slightly higher price to account for their fee.

I am happy to entertain custom 3d printed things for this liftgate space since I already have the panel replicated.

20241230_192945.jpg


20241230_193040.jpg


20240727_194049.jpg


20241125_225548.jpg


20241230_222139.jpg
 
Last edited:
Better photo showing the slight trimming needed behind the cargo light panel.

20241127_173732.jpg
 
Between here and FB groups, thanks for the orders. Helps progress other 3d printed toyota projects! Batch #3 out the door. Nobody expects car parts in floral packing ha.

20250122_094432.jpg
 
Interested in a white / white combo. Fits 2017 models? Thanks.
Yes, fits great! As long as the vehicle is power lift gate equipped, it's plug and play.
 
Last edited:

Users who are viewing this thread

Back
Top Bottom