Getting tired of the wobbly windshield suction mount that came with your scangauge 3? This new case design has an integrated ram mount and shaves .6" off the overall width which means it doesn't block any driver or defroster vents and puts the scangauge further into the corner than and other option.
This is a direct swap for the factory scangauge housing, it takes removal of 4 screws on the back to separate and swap the screen over. Same 4 screws are used to secure the new mount together. This product can be sold by itself and as a complete kit with a modified 4" dual-swivel ram extension and the A pillar ram mount specifically for the 08-21 landcruiser/lx570.
What's included in the kit:
-Scangauge 3 case
-4" dual swivel ram style extension
-LC200/LX570 A pillar Ram mount
-One 1/4"-20 nut and socket cap bolt for a cleaner install for top swivel socket (optional use)
This is a direct swap for the factory scangauge housing, it takes removal of 4 screws on the back to separate and swap the screen over. Same 4 screws are used to secure the new mount together. This product can be sold by itself and as a complete kit with a modified 4" dual-swivel ram extension and the A pillar ram mount specifically for the 08-21 landcruiser/lx570.
What's included in the kit:
-Scangauge 3 case
-4" dual swivel ram style extension
-LC200/LX570 A pillar Ram mount
-One 1/4"-20 nut and socket cap bolt for a cleaner install for top swivel socket (optional use)
