KDSS relocation kit (2 Viewers)

[studio19atx]

I am planning to put 295/70/18, which KDSS relocation kit you recommend? Trail tailor is out of stock, any other retailer have them or someone here looking to sell them?

I have 2” in the front (OME 2702) and 0.75” in the back.

I am using 0.75” spacers all around.

 

[NoClue]

I am planning to put 295/70/18, which KDSS relocation kit you recommend? Trail tailor is out of stock, any other retailer have them or someone here looking to sell them?

I have 2” in the front (OME 2702) and 0.75” in the back.

I am using 0.75” spacers all around.

SLEE - Swaybar Relocate Kit for KDSS - '08 - '21 Land Cruiser - Slee Off Road

Pair of brackets Supplied with hardware

sleeoffroad.com

 

[CharlieS]

Keep in mind Trail Tailor is closed until Jan, so if you look on the site, everything appears out of stock whether it is or not.

 

[studio19atx]

SLEE - Swaybar Relocate Kit for KDSS - '08 - '21 Land Cruiser - Slee Off Road

Pair of brackets Supplied with hardware

sleeoffroad.com

Thank you

 

[studio19atx]

Keep in mind Trail Tailor is closed until Jan, so if you look on the site, everything appears out of stock whether it is or not.

This is good info. I will wait until after Jan 4 and reach out Trail Tailor

 

[ga12r1]

I am planning to put 295/70/18, which KDSS relocation kit you recommend? Trail tailor is out of stock, any other retailer have them or someone here looking to sell them?

I have 2” in the front (OME 2702) and 0.75” in the back.

I am using 0.75” spacers all around.

I ran the same tire size on +25 wheel with the Slee and it was perfect. I've since moved to 285/75/18.

 

[studio19atx]

I ran the same tire size on +25 wheel with the Slee and it was perfect. I've since moved to 285/75/18.

Which 285/75/18 are your running now? Do you still have the KDSS relocation bracket?

 

[ga12r1]

Which 285/75/18 are your running now? Do you still have the KDSS relocation bracket?

I am running Toyo MTs. Yes, I am still running the relocation bracket because the 285/75/18s are taller than the 295/70/18s I had.

295/70/18 on the left 285/75/18 on the right. Both are mounted.

 

[studio19atx]

I am running Toyo MTs. Yes, I am still running the relocation bracket because the 285/75/18s are taller than the 295/70/18s I had.

295/70/18 on the left 285/75/18 on the right. Both are mounted.

View attachment 2537598

285/75/18 looks nicer

With the lift I have and the spacer is there any way to get away without the KDSS relocation kit? Or is it a must?

 

[ga12r1]

In can't see it working without one.

 

[4wheelgreg]

Any one know if either brand of relocations are made of Steel ?

 

[mcgaskins]

285/75/18 looks nicer

With the lift I have and the spacer is there any way to get away without the KDSS relocation kit? Or is it a must?

Take a look at this thread, and I think it will answer that question for you. The short answer is no they will definitely not fit because of the KDSS:

34s vs 35s on the 200

I recently went through this journey in my build thread, but I figured it might be easier to locate in the future on its own as more members buy and build trucks and try to determine which size tire is appropriate. I think it's safe to say just about everyone wants to go bigger when they get new...

forum.ih8mud.com

 

[4wheelgreg]

I'm surprised no one has made a reshaped arm like Reid Racing makes custom steering arms for Dana axles . I have made a few custom arms for straight axle crossover steering setups . Anyone ever modified a stock arm ?

 

[studio19atx]

Take a look at this thread, and I think it will answer that question for you. The short answer is no they will definitely not fit because of the KDSS:

34s vs 35s on the 200

I recently went through this journey in my build thread, but I figured it might be easier to locate in the future on its own as more members buy and build trucks and try to determine which size tire is appropriate. I think it's safe to say just about everyone wants to go bigger when they get new...

forum.ih8mud.com

Thank you.

 

[linuxgod]

I'm surprised no one has made a reshaped arm like Reid Racing makes custom steering arms for Dana axles . I have made a few custom arms for straight axle crossover steering setups . Anyone ever modified a stock arm ?

I think @TRAIL TAILOR was working on some end links which were longer, if you browse through Jason's thread. I'm not sure if they'd resolve the issue with how the bushings get tweaked, but I'd like to think so.

 

[studio19atx]

I think @TRAIL TAILOR was working on some end links which were longer, if you browse through Jason's thread. I'm not sure if they'd resolve the issue with how the bushings get tweaked, but I'd like to think so.

I am contemplating the spacers and thinking to not to go 35”. How Will the longer ones help? Won’t they put more stress?

 

[linuxgod]

I am contemplating the spacers and thinking to not to go 35”. How Will the longer ones help? Won’t they put more stress?

I am not sure. Best bet is to contact Jason. He's a guru on this stuff IMO

 

[unclemat]

Any one know if either brand of relocations are made of Steel ?

Maybe someone can answer?

 

[linuxgod]

Maybe someone can answer?

I believe the Slee one is. Every other one out there is aluminum AFAIK