- Thread starter
- #221
you better hurry up then.. we'll be driving flying cars by the time you finish this project.
Like a fine aged bottle of Boone's Farm, these things take time.
Joe's '87 60 Frameoff Using '88 62 Frame (1 Viewer)
- Thread starter Joe_E
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Like a fine aged bottle of Boone's Farm, these things take time.
well, I'm still rebuilding my carb. I started about four years ago.
- Joined
- Sep 26, 2003
- Threads
- 117
- Messages
- 11,199
- Location
- Lancaster, Ohio, USA
- Website
- www.tlcperformance.com
Where's my damn flying car?! 
Back in the 1970's, multiple Popular Sci and Pop Mechanics magazine articles promised me a flying car in 10 years.
Back in the 1970's, multiple Popular Sci and Pop Mechanics magazine articles promised me a flying car in 10 years.
Joe_E, I think its time for an update. And after you're finished you should compile a new FSM with color photos. 
- Thread starter
- #226
Joe_E, I think its time for an update. And after you're finished you should compile a new FSM with color photos.
Not much to update.
Other than my paint guy got T-boned by an old man who ran a stop sign about two weeks after he started working on the body. He got banged up and has been going to rehab and my FIL told me last week he may need his hip replaced. I haven't been bothering him about the truck because he has his health to repair.
I did sandblast and restore my overseas 2F carb hat and cannister filter though. Came out pretty sweet i think. Also found the OEM hose that connects the two. Gotta hit that with some wesley's tire restorer or something..
yooper
SILVER Star
What paint did you use for that airbox and carb hat? I need to do two of them.
- Thread starter
- #228
I actually took the bottom of the air cleaner to the powder coater because it was too big for me to blast in my cabinet. He blasted it, which is a ton of blasting including the inside, and shot it with satin black powder.
The lid and carb hat i blasted and rattlecan painted with Eastwood Extreme Chassis Black Satin. By far the best paint i have come across.
yooper
SILVER Star
I've been meaning to try that paint. I'll go ahead and order some now. I think I can fit the air cleaners in my blasting cabinet....Did you use their primer too?
- Thread starter
- #230
Yes for those pieces I used the primer cause I had them down to bare metal. The key is wiping them down good with something like their Pre Prep.
I have used that paint on most all of my parts Yoop. It's that good.
I have used that paint on most all of my parts Yoop. It's that good.
yooper
SILVER Star
Yeah I always use primer on bare metal and since I got a blasting cabinet almost everything goes to bare metal now. 
I went ahead and made an Eastwood order. That added up quick.
I went ahead and made an Eastwood order. That added up quick.
Sorry about your paint guy Joe
Good progress!
Good progress!
That is just magnificent...the whole thing so far. Like building a 1:1 model. It will be so rewarding to turn it over for the first time as a tuned, better-than-factory fresh Land Cruiser...indescribable 
agomez
Frijoles
crickets......
MAn this has to be one of the best builds I have ever seen!!! Cheers! Keep up the great work.
- Thread starter
- #236
Yep.
Next purchase is a coolstream compressor and dryer.
Then i'm two blocked until the body is done.
can't wait for MOAR! Excellent work
- Thread starter
- #238
Progress!
Stopped over my paint man Mike's place last night finally. He's feeling better and started spraying the 8B2. He showed me where he found rust starting around the windshield and side windows and fixed it. Also apparently it was sideswiped on the rear corner slightly and they must of backed into something and dented the lift gate. This must of happened in the first couple years of it's life.
He still has a ways to go and i told him to take his time and do it right. He is going to go over the bottom as well.
Stopped over my paint man Mike's place last night finally. He's feeling better and started spraying the 8B2. He showed me where he found rust starting around the windshield and side windows and fixed it. Also apparently it was sideswiped on the rear corner slightly and they must of backed into something and dented the lift gate. This must of happened in the first couple years of it's life.
He still has a ways to go and i told him to take his time and do it right. He is going to go over the bottom as well.
It is Threads like this that give me so much ambition to work on my truck.
Amazing build thread. There is doing it right and then there is doing it the way Joe is doing it.
Keep up the good work. I will be following this thread for my restore
Amazing build thread. There is doing it right and then there is doing it the way Joe is doing it.
Keep up the good work. I will be following this thread for my restore
- Joined
- Jun 21, 2011
- Threads
- 233
- Messages
- 21,823
- Location
- Redding, California
- Website
- trail-tailor.com
Wow Joe! Nice work you're doing. Paint is gonna look good. He seems to take a great deal of care in his prep for you. It's nice to find good people o work with.
