SOLD IN - FJ40 - 1979 2F Engine (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I have a 1979 2F engine for sale for $500. The motor can be turned by hand. I got it from "County Cruisers" in Ridgeville, IN as part of a trade for a parts rig I had. He said the history was it came from a lower milage plow truck.

View attachment 3482105

View attachment 3482106

View attachment 3482107

View attachment 3482108

View attachment 3482109
Do you still have this? And, do you have the transmission & transfer case? If so, tell me about the tranny. I just got a 1971 FJ40 that I'm trying to source parts for on a tight budget. Thanks
 
Do you still have this? And, do you have the transmission & transfer case? If so, tell me about the tranny. I just got a 1971 FJ40 that I'm trying to source parts for on a tight budget. Thanks
Yes I still have this. I also have the 4spd trans, transfercase and bellhousing/flywheel/clutch. I have them listed separately but would make a package deal on them all.
 
Yes I still have this. I also have the 4spd trans, transfercase and bellhousing/flywheel/clutch. I have them listed separately but would make a package deal on them all.
Hit me up in a conversation and let's talk.
 
I have a 1979 2F engine for sale for $500. The motor can be turned by hand. I got it from "County Cruisers" in Ridgeville, IN as part of a trade for a parts rig I had. He said the history was it came from a lower milage plow truck.

View attachment 3482105

View attachment 3482106

View attachment 3482107

View attachment 3482108

View attachment 3482109
Hey, haven't heard back from you (or if I did, I missed it somehow). I'm a serious buyer, not just tire kicking. Looking down into the oil filler opening the inside doesn't look nearly as bad as the outside. Was the engine / clutch assembly / 4 speed transmission and transfer case all running good when pulled? Or, was it pulled because something was sick? What would your price on the entire assembly be? Looks really rough, but if it was used to salt and plow roads that not surprising. I could put my boys on it scrubbing and cleaning with wire brushes AND burn some energy off their 14 & 10 year old selfs! LOL! Let me know.

Also, I posted something in the "Trade" section of the classifieds that someone might be interested in too.
 
Hey, haven't heard back from you (or if I did, I missed it somehow). I'm a serious buyer, not just tire kicking. Looking down into the oil filler opening the inside doesn't look nearly as bad as the outside. Was the engine / clutch assembly / 4 speed transmission and transfer case all running good when pulled? Or, was it pulled because something was sick? What would your price on the entire assembly be? Looks really rough, but if it was used to salt and plow roads that not surprising. I could put my boys on it scrubbing and cleaning with wire brushes AND burn some energy off their 14 & 10 year old selfs! LOL! Let me know.

Also, I posted something in the "Trade" section of the classifieds that someone might be interested in too.
Just sent another PM and email.
 
Bump. Happy to assist with shipping.
Did you say $2,500 for everything....???

I was seriously looking at a fully rebuilt and documented 2F + rebuilt 4 speed transmission + rebuilt transfer case (of course I've got a transfer case) but the seller has been on vacation for a couple of weeks and I'm ready to make a move and get things happening. Tell me more about the Overdrive unit, and/or send me the full manual so I can see if I could just bolt it up and go like the old Fairey Overdrive units, or if the Overdrive Unit you have would require modifying the drive shafts lengths.

Thank you,
Don
 
Did you say $2,500 for everything....???

I was seriously looking at a fully rebuilt and documented 2F + rebuilt 4 speed transmission + rebuilt transfer case (of course I've got a transfer case) but the seller has been on vacation for a couple of weeks and I'm ready to make a move and get things happening. Tell me more about the Overdrive unit, and/or send me the full manual so I can see if I could just bolt it up and go like the old Fairey Overdrive units, or if the Overdrive Unit you have would require modifying the drive shafts lengths.

Thank you,
Don
Also, tell me (and maybe even send me pics) of the dash pads, bumper, 4 speed drive shafts and other items you mentioned.

Does this 2F have electronic ignition (distributor), or is it the old points and condenser? Is everything complete and on it, ready to drop in, connect, and fire it up to go for a spin?

Don
 

Users who are viewing this thread

Back
Top Bottom