I pulled the body on a rolled 94 I'm parting out this AM. I hate working from underneath and with the work I have to do this next week it made sense to do it. I hooked a chain through the Ebrake hole and through the gas tank inspection cover and used an engine lift. It worked fairly well. I need to get a star so I can post some pictures. Here is a link to one of the pictures.
http://www.nwcruisers.com/cgi-bin/yabb2/YaBB.pl?num=1134926619/0#0
It was pretty easy to control on the engine lift. It is very tippy but with a push here and push there it wasn't too bad. Now the next step is to get it out of the garage. I think I will just invite a bunch of people over and we can lift it out and onto the trailer. A friend is going to make a half height trailer out of it. He will cut it right below the windows and weld in a bulkhead between the B pillars at the front of the back doors. Then he is going to build a hinged top.
http://www.nwcruisers.com/cgi-bin/yabb2/YaBB.pl?num=1134926619/0#0
It was pretty easy to control on the engine lift. It is very tippy but with a push here and push there it wasn't too bad. Now the next step is to get it out of the garage. I think I will just invite a bunch of people over and we can lift it out and onto the trailer. A friend is going to make a half height trailer out of it. He will cut it right below the windows and weld in a bulkhead between the B pillars at the front of the back doors. Then he is going to build a hinged top.