ginericLC

I have motors that work. 62 mirrors are definitely different than 60 mirrors. PM me if you are interested in just motors. I have a couple of them that the mounts broke off the mirror heads.

I probably still have it. shoot me a PM to remind me if you haven't already found the upper trim.

$250 each in the correct color is a steal. You are looking at much more to have anything shipped. I have LX470 doors in Idaho but not in the correct color.

I have a set of double purple light blue white boxed and ready to ship. These are https://www.toyota-4runner.org/3rd-gen-t4rs/66753-lc-coil-spring-color-codes.html

Come and get them. They are actually in my scrap pile now.

I probably have a set kicking around in Mountain Home. I'm not sure why I didn't see this earlier in the summer.

I have them off a 99

I have a set in Idaho. But you are probably better off finding more local. $750 for the pair plus whatever shipping you arrange.

I have one that needs the gear replaced. I have another one but I haven’t tested it yet.

Yes I still have one.

Give me a jingle on Monday

I imagine in the 180-220k mile range. Most of the 80s I've parted were in that range. I have tested it in my 80. No CEL and it works as it should.

I have one $250 plus shipping. It could go out in the morning.

I have a set, I'll be in SLC on Saturday for Cruiserfest. I could bring them along. $150 with the belts.

You are looking for an aftermarket grill set of letters. The factory as stated above is molded into the grill. The aftermarkets had removable end letters to skirt Toyota's copyright. I'm telling you what you are looking for is going to be...

I think this is one of the never fail items. In 20 years I've never sold one. I have about a dozen of them.

Weight typically doesn't matter when shipping a complete vehicle even if non-operable. The non-operable will cost you a lot in shipping and it really limits the carriers willing to deal with it. Shippers typically base cost on length and...

I have one out of an 87.

I suppose I could sell them. I have a set off of mine. I was planning on selling them with the rack.

You need a 95-97 lid. They are very popular as people use them for LS swaps in 62s and 80s. If you can weld, buy a mandrel elbow on ebay and cut the old one out and weld the new one in. You can even go bigger if you want to. I did this once...

Butch the 91-92 are different and there are two different vesions of the FJ62 brackets. And it makes a difference as they align differently to the crank pulley. I think if you switched the crank pulley it would work. In my case, I was using a...

Look on ksl.com classified. Someone has the complete upper and lower with the lights for $1000 which is quite reasonable. I can't remember if it was landcruiser or land cruiser I searched for under auto parts.

I don't have them in white. Sorry! I had the rear in white but it had some door dings. If you are going through the effort to do this you probably want to get the best you can get.