Ok well finaly got my twinstick shifters finished...Need to paint and weld on the shift levers but wanted to make sure everything was going to be good before I did that.
I got the balls(hehe) and heims from mcmastercar.com everything else i made.
The shifter pivot i used the origonal stud and cut the pivot off. Drilled it out and used a 5/8s rod i had. I didn't like the how sloppy it was with the stock diameter part. Should be getting a couple wavey washers to set the preload on the levers so they are nice and snug.
Stew
I got the balls(hehe) and heims from mcmastercar.com everything else i made.
The shifter pivot i used the origonal stud and cut the pivot off. Drilled it out and used a 5/8s rod i had. I didn't like the how sloppy it was with the stock diameter part. Should be getting a couple wavey washers to set the preload on the levers so they are nice and snug.
Stew