Back in October I changed out my calipers, rotors and pads with all new OEM equipment. Since then i have done 2 coast to coast trips with some offroading thrown in for good measure (15,000 miles).
I now have developed a very noticeable vibration/pulsing when i am braking. Noticeable at all speeds but definitely worse at higher speeds.
I don't feel the vibration through the steering wheel which is leading me to suspect the rears. I did a quick visual today on the rears and even put a dial guage on the rotors but everything appeared ok. I pulled the pads and inspected them and they also looked ok.
Is there some way to isolate 1 corner at a time to see if the issue goes away? I have some local roads that i could test it on without endangering myself or other.
Any suggestions would be greatly appreciated.
I now have developed a very noticeable vibration/pulsing when i am braking. Noticeable at all speeds but definitely worse at higher speeds.
I don't feel the vibration through the steering wheel which is leading me to suspect the rears. I did a quick visual today on the rears and even put a dial guage on the rotors but everything appeared ok. I pulled the pads and inspected them and they also looked ok.
Is there some way to isolate 1 corner at a time to see if the issue goes away? I have some local roads that i could test it on without endangering myself or other.
Any suggestions would be greatly appreciated.