I was looking at the front wheel of my '78 FJ40 with the wheel off. Is this the process to replace the stud?
1. take the brake caliper off
2. take the hub off (those nuts) - if so, will I be needing the gasket?
3. pull the rotor out
4. separate the rotor and replace the stud
I need help. Thanks.
1. take the brake caliper off
2. take the hub off (those nuts) - if so, will I be needing the gasket?
3. pull the rotor out
4. separate the rotor and replace the stud
I need help. Thanks.