found a 45lv in the woods today - post up if you want parts (1 Viewer)

[treerootCO]

There wasn't a toolkit or a jack under the front seat was there?

 

[MadmanCruiser]

Semlin, I don't know about pb blaster or auto-rx, but I do know of a website that claims to ship POR 15 to Canada:

http://www.prp-porstore.com/index.html

In fact, I'd be happy to assist you in getting anything that is unavailable to you in Canada. I can get it here and ship it to you. This is a cool thing you are doing here. If I can send a little payback your way, let me know.

I have bought both Por-15 and AutoRX in Canada. I'm in Toronto, the Por Distributor is based out of Quebec or something.

I didn't find that the Auto-RX made any difference (for what its worth)

Good work and may the Cruiser Gods bless you with nothing but good Cruiser Karma.

Adam

 

[fjwagon]

Man, i missed the sale. Semlin, do have any horn hardware....I'm looking for the brush and spring...it's located under the "last to be removed before removing the steering wheel" And also looking for an ignition switch.

 

[semlin]

there is a rusty washer/ring behind the steering wheel retainer bolt. is that what you mean?

treeroot, I looked under the front seat but to be honest not too hard and holding my breath because the entire front seat is an old mouse nest as i discovered when I removed the rear ashtray. outside looks good, inside = nest. Got all spooked about hantavirus .

 

[warrior_1515]

Got all spooked about hantavirus .

Since I had no clue....

http://www.hantavirus.net/info2.html

 

[65-fj45]

Semlin, I must commend you on your good deed, Thanks for keeping other LV's alive.

 

[fjwagon]

Yes, After removing the bolt, the "ring" comes off.....well behind that there is a small cylinder looking thing that is called a brush. I need that small piece and the spring that is in the sam location. How about the ignition switch has that been spoken for. Thanks

there is a rusty washer/ring behind the steering wheel retainer bolt. is that what you mean?

 

[semlin]

ok the ignition is there so it is yours as will be the horn ring brush if it is there.

 

[AZkick-n40]

Semlin,

I don't have an LV but wanted to say what you are doing is very generous - a tribute to the LC community.

Now get out there in the woods and find some 45lwb parts!

Thanks!

Brian

 

[Land Cruiser Junky]

Ground Up, I definately need the "ROOM" switch if you've got an extra. Thanks.

WARRIOR, If you don't get the back hatch catch thingy you need, pm me. I've got an extra.

 

[1FE pig]

I'm sleeping again.Sure could use that driver door.
Rob

 

[Owyhee Jackass]

by the way are the rectangular plastic handles above the door panels visible in the last shot stock? I figured not so I left them. all 4 are intact if stock.

Not sure if anyone answered this, but yes they are stock and I thought I saw someone mention they needed them.

 

[cruiser_guy]

Not sure if anyone answered this, but yes they are stock and I thought I saw someone mention they needed them.

That was me and Yes I do need them.

 

[fjwagon]

Ok Thanks send me a pm

ok the ignition is there so it is yours as will be the horn ring brush if it is there.

 

[fjwagon]

One more part, before I forget. There is a piece of brake line shaped like an "L" that is attached to the front section of the frame near the bib/battery/passenger side. If you stand in front of the vehicle and look down on the left side you will be able to see it. Mine is corroded from the battery acid falling on it. If it's corroded I can still use the fittings. Mine got misplaced somehow. If anyone can post a pic that would be helpful. Thanks

 

[orangefj45]

is this rig still accessable for parts? i need a small interrior panel. goes on the inside of the driver side tail light lese. roughly 10x10 inches with a 90 deg gradual bend in it retained by a few phillips head screws. i can post a pic of what i need if that description is no good.

 

[semlin]

yes it's still there and if you are talking about the interior body piece i have to take it off anyway to get the taillight assemblies for matt so when i next get there it is your.

i will next get there either end of may or july.

 

[orangefj45]

very cool. thanks in advance!

 

[cruiser_guy]

PM me your contact info. I'll be back in B.C. in about a month.

 

[semlin]

I'm heading up tomorrow for two weeks and I'll finish off what I can. Post up what you need folks!

edit: please post to the new thread i started as I'll be on dialup and this one takes forever to load. everyone who posted here already still has first dibs but it would be nice to here from you again to confirm you still need the stuff!