Loaded it up last night....
Wanted FJ60 Manual (20 Viewers)
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Gas Filler Shield -1958-9/72 FJ40
THis is the plastic (or fiberglass) shroud that protects the gas neck. Thanks folks!
THis is the plastic (or fiberglass) shroud that protects the gas neck. Thanks folks!
Gas Sheild
I think I have one I will check tonight and let you know tomarrow I'll send ya a PM.
I think I have one I will check tonight and let you know tomarrow I'll send ya a PM.
78 fj 40 need fuel line protector
The one that attaches to the floor and the side protectors.
Thanks Jim
The one that attaches to the floor and the side protectors.
Thanks Jim
I am also looking for a gas fuel neck that a stock gas cap will fit
1966 Fj45
i would like to find a soft top for my 1966 FJ45 long bed pick up. does anyone out there know if that is a real possibility, or am i just dreaming? i have the hard top off for the summer. i' ve had her for a few months now and am totally having a blast! thank you so much! waywanda*
i would like to find a soft top for my 1966 FJ45 long bed pick up. does anyone out there know if that is a real possibility, or am i just dreaming? i have the hard top off for the summer. i' ve had her for a few months now and am totally having a blast! thank you so much! waywanda*
got both, PM me. In Colorado
orangefj45
Supporting Vendor
pretty sure i have one as well.
- Joined
- Apr 14, 2004
- Threads
- 1,466
- Messages
- 36,637
- Location
- 818-953-9230
- Website
- www.marksoffroad.net
What 3-puppies is trying to say is, there is a guy that has a shop in Pakistan named Ehsan that makes a softtop for the 45. Another MUD member named Chef has one on his 45 IIRC. He won't be back from the Ramble until next week, but if you do a thread search, you can find pics on it.
I got to see a couple of the softtops that Ehsan makes for the FJ40 when I was in Moab last month. The workmanship is ok, but the owners tell me that the fabric is not of the highest durability. That said, I don't think you can go wrong for the $$ involved.
Group buys are arranged from time to time to help save on shipping costs. The last group buy was placed in January, and we are still waiting for our goods, so this is something to keep in mind too. I have heard a rumour that Robert at Liquid Off Road will start to carry the soft tops stateside, but I don't know if that is true, or when.
Welcome to IH8MUD. You should sign in on our FJ45 forum.
I got to see a couple of the softtops that Ehsan makes for the FJ40 when I was in Moab last month. The workmanship is ok, but the owners tell me that the fabric is not of the highest durability. That said, I don't think you can go wrong for the $$ involved.
Group buys are arranged from time to time to help save on shipping costs. The last group buy was placed in January, and we are still waiting for our goods, so this is something to keep in mind too. I have heard a rumour that Robert at Liquid Off Road will start to carry the soft tops stateside, but I don't know if that is true, or when.
Welcome to IH8MUD. You should sign in on our FJ45 forum.
Thanks guys but I have some on the way. again thanks if these dont work out I may get back with you.
axles
i have a set off a 66 if you would like i also have 3 sp tranny and transfer in sunnyside wash
i have a set off a 66 if you would like i also have 3 sp tranny and transfer in sunnyside wash
Last edited:
For rear there is no difference aside from the 79+ 3.70 ratio, and early-77 vs 78 coarse vs fine spline pinion.
For front 68?+ =coarse spline birf, drums,
76-78= odd size fine spline birf, disks, small knuckle stud bolt pattern (less availability of aftermarket birfields and histeer arms)
79- 1/90- standard fine spline birf (same as minitruck and SFA 4skinner), large bolt pattern knuckle studs- high availability of aftm arms
76-78 is more than fine for a street/light trail truck. If you have big birfield breakin plans, 79-later or hybrid axle (any 68+ housing will work with any disk knuckles) is best for aftm avail and spare avail.
For front 68?+ =coarse spline birf, drums,
76-78= odd size fine spline birf, disks, small knuckle stud bolt pattern (less availability of aftermarket birfields and histeer arms)
79- 1/90- standard fine spline birf (same as minitruck and SFA 4skinner), large bolt pattern knuckle studs- high availability of aftm arms
76-78 is more than fine for a street/light trail truck. If you have big birfield breakin plans, 79-later or hybrid axle (any 68+ housing will work with any disk knuckles) is best for aftm avail and spare avail.
SM420 top plate
Just need a top plate, shifter is a bonus, but not needed.
Thanks!
Just need a top plate, shifter is a bonus, but not needed.
Thanks!
Winch
im looking for a winch, new, uesd, not even working, it does not matter. i just want a good deal on a one, i can fix it. any one got one or know where i can get a deal one one?
Grady
im looking for a winch, new, uesd, not even working, it does not matter. i just want a good deal on a one, i can fix it. any one got one or know where i can get a deal one one?
Grady
I think I have the knuckles and spindles. No wheel hubs. I'm in New Mexico.
I have a few things.. I need to dig them out though to be sure.
