Wanted FJ40 Throttle Linkage (1 Viewer)
- Thread starter Will615
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I have this, missing a rod.
- Joined
- Apr 14, 2004
- Threads
- 1,394
- Messages
- 35,266
- Location
- 818-953-9230
- Website
- www.marksoffroad.net
That looks like the second iteration Kevin. 2F. The first iteration in ‘74 would have different standoff points because the F engine carb plenum is closer to the head. Almost an inch closer.
Not saying it won’t work. Might work with some tinkering. And I’m sure your ‘garage’ price is much better than my ‘shop overhead’ price.
Not saying it won’t work. Might work with some tinkering. And I’m sure your ‘garage’ price is much better than my ‘shop overhead’ price.
Last edited:
I may have the early version...will check later
Will this help?
forum.ih8mud.com
For Sale - 74 Carb linkage
140.00 shipped. Not sure if it is complete nor if the pieces are all from the same year.
forum.ih8mud.com
When I installed a 2f with a 77 or so manifold in my 74 I didn’t realize that the 74 setup was slightly different until I was hooking up carb linkage that was the original for the 74. I was trying to figure out what the hell was going on and then remembered reading here on Mud about the 2f manifolds sit about an inch further from the block.
Here is the other one I spoke of.
Bottom one in picture.
Bottom one in picture.
- Thread starter
- #9
Thanks for all in help everyone. I didn’t realize my F.5 linkage was different then the later.
If anyone has everything together for a 74 let me know. I’m needing the vertical rod that connects from the pedal up to the horizontal rod, the horizontal rod, the small rod at the end and the carb end bracket. Only parts I don’t need are the petal and firewall bracket where the vertical and horizontal links come together.
Thanks!
If anyone has everything together for a 74 let me know. I’m needing the vertical rod that connects from the pedal up to the horizontal rod, the horizontal rod, the small rod at the end and the carb end bracket. Only parts I don’t need are the petal and firewall bracket where the vertical and horizontal links come together.
Thanks!
hi ....
perhaps there a few important key items parts topics you may have over looked on your 1974 set up you now have ..?
- your fire wall bracket it metal , every single other part on it related to it is a weal and tear age and time part most of all the 3 different black grommet bushings
- the period correct return spring
- the gas pedal boot , on fire wall , 1 ' DINE " size hole , you will have dead smell mice terds in your nice 74 for life , nesting in a blower motor fan , that u the pull the fan pull , is instant Walking Dead mouse guts everywhere in July , that is a bad thing .....
-
( RE-BUILD KIT ONLY ) New Updated Accelerator Torque Rod Bracket Cushions Collars Kit 90560-06238 / 90540-09059 FJ40, FJ55 2F 1/75-12/84 NOTE : The Metal Bracket Shoen In the Photos Is ONLY a Photo PROP and Is NOT Parts Of the Kit Content
NOTE : The Bracket Shown in the Photo's Is For Display Puoposes Only And NOT Part of This Cushions Kit, ...
vintageteqparts.com
.
/
NEW ( Orange ) BOOT, ACCELERATOR CONNECTING ROD 10/72-1987 FJ40 FJ60 FJ55 FJ45 HJ60 HJ45 78199-90351 / 78199-90352 / 78199-90353 - VintageTEqParts.com
( Orange) BOOT, ACCELERATOR CONNECTING ROD Sub Assy, Gas Peddle Orange Rubber Boot old part # 78199-90352 - NEW...
vintageteqparts.com
NEW J.I.S. GOLD CAD YELLOW ZINC PLATED F , F1.5 , 2F 3F CARB . ENGINE CARBURETOR Carb THROTTLE Linkage Return Spring Call Out # 78141A Part # 90506-12034 LIVES ONCE AGAIN ! FITS ALL Gasoline TOYOTA Carburetors 1962-1992 GLOBALLY - VintageTE
- FITS ALL Gasoline TOYOTA Carburetors 1962-1992 GLOBALLY - NEW GOLD CAD YELLOW ZINC CHROMATE PLATED - 2F ENGINE Carb CARBURETOR...
vintageteqparts.com
.
don't forget to steep your new Nylon infused rotational bearing , fire wall grommet at full boil , in your T-TEN beaker , no less then 6 solid mintes /...
.
,,,
.
,,,
