Builds FJ 45 Extended Cab Custom Vehicle Build Finally Begins (9 Viewers)

[bogus one]

Some people can weld toilet paper to a brick without using Argon.


I am not one of them people.

Oh, that's easy. Just get some toilecrete wire for your mig.

I'm sure Crazy could help you out there, Dan

 

[Mudkiwi]

Nice work

Its looking good

 

[D'Animal]

Made a little progress today.

I helped another Mudder assemble his FJ 40 and get it running and then worked on this for a few hours.

 

[D'Animal]

I really had no idea body filler would burn. I guess it has to be 1/4" thick before a plasma cutter will light it.

(This is on the "Good" section I'm reusing.)

 

[D'Animal]

A little pre-mock up.

 

[D'Animal]

The rear of the bed is the final height. The front still needs to go down 4". I just forgot to trim the lip before I dropped the bed frame on.

 

[slickrock]

Nice Dan! Let me know if you need help welding the panels together or working on filling the seams with filler.

 

[D'Animal]

I really need to quit thinking about my tow rig and get this installed.




I think it is a little over the top for this rig.

 

[D'Animal]

A little more progress on the Bed.

I had the UPS man help me take the steel decking off. I smoothed the edges on all four corners, flipped the bed over and welded the bottom to the sill.

 

[D'Animal]

I welded up some supports to stiffen the center of the bed.

These wil also be used to secure the bed to the frame with bolts.

 

[D'Animal]

I flipped the deck back over and slid the top frame structure back on.

 

[Mace]

Nice.. Gooseneck is a good addition lol

 

[D'Animal]

It almost fits.

A little more fine tune grinding and it will fit like a glove. It will then be time to make the wheel wells and the rest of the uprights.

 

[D'Animal]

It will then be time to shorten the tailgate.

 

[D'Animal]

Before any purist start PM'ing me about cutting a perfectly good tailgate.


It's really not THAT good.


I must have got a little crazy with the Walnut shells when I blasted it. The inside bottom is almost completely gone.

 

[D'Animal]

Wait until you see the modification I have planned for my SPEN.

Nice.. Gooseneck is a good addition lol

 

[D'Animal]

The front is fitted and the height is dead on.

I ground down the diamond areas of the diamond tread to get a good surface to weld to and so it sits where it is suppose to.

 

[24HOURSOFNEVADA]

It's looking great Dan. Keep up the good work.

 

[kling-on]

NICE work it lookin great

 

[hudyhue]

wow dan you been busy....lookin good bro you going to be able to make it to the tech insp?