I was hoping I could get some help from the forums. I have an issue with engine stalling when braking and it stalls periodically when at idle. Pretty scary situation when it happens especially while vehicle is still moving. Oil pressure gauge is dropping very low after the engine warms up. The engine runs perfect when driving above 1500 rpm and you would never expect it to have problems.
What I have done:
I have done some research and have checked all vacuum lines and everything appears to look good. I also checked break booster hoses and intake hoses and I do not see any cracks. However, when I removed the intake hose I saw a "T" for vacuum line exposed with no line attached underneath the throttle body. There is orange connectors and one side is not connected but I do not see any hoses to attach to it. But it is very tight and I don't want to take apart the throttle body. I will attempt to add picture of what I saw. Any help is appreciate.
What I have done:
I have done some research and have checked all vacuum lines and everything appears to look good. I also checked break booster hoses and intake hoses and I do not see any cracks. However, when I removed the intake hose I saw a "T" for vacuum line exposed with no line attached underneath the throttle body. There is orange connectors and one side is not connected but I do not see any hoses to attach to it. But it is very tight and I don't want to take apart the throttle body. I will attempt to add picture of what I saw. Any help is appreciate.