I use nylon fasteners. Under $1 at box store.
No issues with theft of plates in my area. The plate does not see any stress on-road.
No issues with theft of plates in my area. The plate does not see any stress on-road.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I did not have an issue with the 12mm head, assuming it was same size. Nylon washer underneath?You can get a 10 pack of M6 x16 brass screws shipped for less than 10.00 from eBay.
That's a good price. I checked McMaster Carr; the screws I linked above which were $4 each were hex drive button head naval brass screws. They also have Pan head Phillips brass screws 5 for $6. FWIW (edited links above for future reference).
I use nylon fasteners
Interestingly I checked McMaster Carr for plastic screws and there were nylon but also PEEK screws which would of course never corrode/rust. The pan head however is a bit small IMO/FWIW.
McMaster-Carr
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.www.mcmaster.com
I'm so tempted to get the Ti screws, but qty 2 for $42.The OEM Toyota bolts for mounting the heat control valve to the firewall have a thin dark bluish/black metal treatment and have the correct threads for the license plate holes. They could be a good choice as they have both a thin wave-type lock washer and a larger washer under that ie: to spread out the force on the plate. They're a bit long at ~30mm but length doesn't matter much if you aren't storing anything inside the liftgate.
There may be a shorter fender bolt with a flat black oxide plating that fits, can check my stash in the am.
just think about how much weight you'll be saving!I'm so tempted to get the Ti screws, but qty 2 for $42.
Edit: Dam you, Kernal!
View attachment 3044647
just think about how much weight you'll be saving!
LMAO y’all bad influence@COYS don't forget the Weathertech 3K carbon fiber license plate frame. Just $134 from NAPA:
View attachment 3048336