Dissent offroad modular front bumper (5 Viewers)
- Thread starter benc
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
They sent samples when I had the wheels done. But that time, I wasn't matching anything... just picking a color I liked. This time... wow... looking at greys on a monitor, factoring in the metal flake, the 144 grays (after filtering for metal flake) Prismatic has... gonna be a whole lot harder.
I contacted them and let them know my stock color and let them know that it was a hard match due to the metallic flakes. They sent me a whole bunch of swatches. Just make sure they know you are an ACTUAL CUSTOMER getting your Dissent bumper painted and you need their help to get the color Right, and not wasting their time.
I went down to a local shop that already had prismatic powder coat chips and found the closest match I could. My bumper is a pretty close match for my rims. Finding chips/swatches is going to be your best bet. Online pix didn't help much and I never would have picked the right color based on the pictures.
@Manhattan and @Get outside I ordered some spray can straw nozzles. Gotta paint that trim piece now
benc
Supporting Vendor
- Thread starter
- #1,166
So here is the newest shipping method. This takes almost as long as building the bumper
Originally I was not planing on crating them to keep shipping cost down but the coated were getting damaged. So now any bumper being powder coated will get the crate. Also I'm not sure if I will be able to ship any of the bull bars coated and guarantee there will be no damage to the powder.
It's now looking like shipping for the coated bumpers will be $200-250, the uncoated will be $130-175 and the DIY will be $110-130. Still right at the same price as freight but the bumpers have been getting to the customer in a week or less and freight is 2-3 weeks.
Here's your bumper, drwapenshaw. Let me know when you want me to send it.
Originally I was not planing on crating them to keep shipping cost down but the coated were getting damaged. So now any bumper being powder coated will get the crate. Also I'm not sure if I will be able to ship any of the bull bars coated and guarantee there will be no damage to the powder.
It's now looking like shipping for the coated bumpers will be $200-250, the uncoated will be $130-175 and the DIY will be $110-130. Still right at the same price as freight but the bumpers have been getting to the customer in a week or less and freight is 2-3 weeks.
Here's your bumper, drwapenshaw. Let me know when you want me to send it.
I'm very interested to hear how this nozzle works, in particular with respect to overspray. I could stand another coat on the lip behind my bumper, but was too excited and bolted on my bumper after one quickly brushed on coat of enamel to cover bare metal exposed from the OEM bumper.View attachment 1091122 View attachment 1091123 Light bar today. Pretty much done.
@Manhattan and @Get outside I ordered some spray can straw nozzles. Gotta paint that trim piece now
Just got the lip behind the bumper blacked out. Putting the bumper on again to check gaps and a couple of loose ends then start on the guards.
Still haven't decided if I powder coat, paint or liner it!
Still haven't decided if I powder coat, paint or liner it!
And here is a pic of the tubes I welded inside the frame as sleeves for the bolts. A bit messier than I would like but it's solid! Had to clean quite a bit inside to be able to weld, too dirty!
Will post results.
just pm benc
bluecruiser
SILVER Star
Question: are you guys cutting the L shaped tabs off that are under the lights or bending them? I think I'm getting some contact at times.
