D'animal 1974 FJ40 - stock

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

OEM parts arrived from Cruiser Corps.

ImageUploadedByIH8MUD Forum1421553742.765999.webp


Pulled the Clutch Master apart and found the usual rust.
ImageUploadedByIH8MUD Forum1421553840.468883.webp


Cleaned up nicely
ImageUploadedByIH8MUD Forum1421553884.211065.webp

ImageUploadedByIH8MUD Forum1421553935.397459.webp


All new parts installed and bench bled it.
ImageUploadedByIH8MUD Forum1421554021.937123.webp


Works great and doesn't leak.

ImageUploadedByIH8MUD Forum1421553884.211065.webp
 

Attachments

  • ImageUploadedByIH8MUD Forum1421553913.312756.webp
    ImageUploadedByIH8MUD Forum1421553913.312756.webp
    12.2 KB · Views: 59
Using the rig as a weekend driver around the neighborhood. Still getting all the little bugs worked out.

Worked on the neighbors shed and found the factory jack came in handy.

Cruising the neighborhood on my way home from the neighbors
image.webp
image.webp
image.webp
 
What you don't like your diff oil chunky ;)

Ever get a chance to go back and see the original owners? I recently did that with mine and the guy was so happy to see the 40 brought back to life.
 
nice rig dosent look like the right valve cover or air filter for the year but its a great start
 
Been using it as a daily driver on the weekends.
Getting the little bugs worked out if everything.
Time to rebuild the front axle.

Ughh

Tie Rod end are getting cleaned and new dust shield boots. Had to drill out a few brocken zerts.


image.webp


Brakes were in great shape. They were set too tight and the springs were on wrong. I had to back them off 3 clicks to get the drums off.
image.webp


Bought a Trail Tamer kit from George at Valley Hybrids / Can Am Cruisers.

image.webp
 

Users who are viewing this thread

Back
Top Bottom