Well I had a chance to build another set of my storage drawers for a local to CT. Mud member. I will be installing in his 80 next week at my shop. Customer made a couple changes and upgraded to locking pull handles, and drawer dividers. It was another fun build. Now I have a template for the 80 series for future builds. These units are rock solid and my favorite mod in my 80. Amazing for camping/sleeping in the back and a ton of organized storage.
Includes:
- Solid 3/4" AC ply construction
- All ply wood edges have 1/8" round over done with router. No sharp edges
- Side compartments flip up for easy to reach storage
- Front compartment (directly behind rear seat) Latch style lock
- European style hinges on all compartments
- 2 drawers. NO slides. Compression fit. Easy to use. Nothing to wear out or rattle. Maximizes size of drawer. Bottom panel of drawers are recessed 1/4" so the drawer glides on the two 3/4" wide side panels.
-4 Ring tie down anchors. Flush mount
-Locking pull latches on drawers. Flush mounted
-Entire unit is finished with 3 coats of acrylic clear coat. Sanded in between coats for a cabinet grade finish. Clear coat underneath all carpeting as well. This unit will stand up to lots of abuse.
-4 metric bolts and washers included for install. Unit bolts down to OEM 3rd row seat holes in body.
-Drawer interiors : 29 1/4" long X 19" wide X 7 3/4" deep
-Front storage behind rear seats : 42" long X 8" wide X 8" deep
-Flip up sides: 40 1/2" long X 8" wide. Not square. Wheel wells are on interior
-unit weighs 130 lbs. Complete.
Base price as shown on first page is $1400
*** EDIT *** LOCKING LATCH PULLS NOW INCLUDED ****
+$0000 for locking pull latch as shown. Included in base price is drawer pulls the same as anchors with no latch. IF pulls are desired deduct $50 from total.
+$40 for two extra tie down anchors in the middle of box for a total of 6.
+$90 for drawer dividers (as shown). Included in base price is no dividers.
I am willing to due other custom mods to fit people's needs.
****UPDATE.
SHIPPING AS FOLLOWS:
WEST COAST: $260
MID WEST: $225
EAST COAST: $200
FULLY ASSEMBLED AND FINISHED. JUST PUT ON SIDE WINGS AND SCREW ON DRAWER FACES WITH SUPPLIED HARDWARE.
2-4 week wait time for build plus shipping time.
*****Update: Carpet and fabric samples on pg.3 post 56. High quality marine grade carpet.
Link to my for sale thread on Yankee Toys club forum with more PICS of original unit I have installed in my 80
Interest in Custom Rear Cargo Storage
Check out the finish pics from this build.
SNSbuildingremodeling.com
Includes:
- Solid 3/4" AC ply construction
- All ply wood edges have 1/8" round over done with router. No sharp edges
- Side compartments flip up for easy to reach storage
- Front compartment (directly behind rear seat) Latch style lock
- European style hinges on all compartments
- 2 drawers. NO slides. Compression fit. Easy to use. Nothing to wear out or rattle. Maximizes size of drawer. Bottom panel of drawers are recessed 1/4" so the drawer glides on the two 3/4" wide side panels.
-4 Ring tie down anchors. Flush mount
-Locking pull latches on drawers. Flush mounted
-Entire unit is finished with 3 coats of acrylic clear coat. Sanded in between coats for a cabinet grade finish. Clear coat underneath all carpeting as well. This unit will stand up to lots of abuse.
-4 metric bolts and washers included for install. Unit bolts down to OEM 3rd row seat holes in body.
-Drawer interiors : 29 1/4" long X 19" wide X 7 3/4" deep
-Front storage behind rear seats : 42" long X 8" wide X 8" deep
-Flip up sides: 40 1/2" long X 8" wide. Not square. Wheel wells are on interior
-unit weighs 130 lbs. Complete.
Base price as shown on first page is $1400
*** EDIT *** LOCKING LATCH PULLS NOW INCLUDED ****
+$0000 for locking pull latch as shown. Included in base price is drawer pulls the same as anchors with no latch. IF pulls are desired deduct $50 from total.
+$40 for two extra tie down anchors in the middle of box for a total of 6.
+$90 for drawer dividers (as shown). Included in base price is no dividers.
I am willing to due other custom mods to fit people's needs.
****UPDATE.
SHIPPING AS FOLLOWS:
WEST COAST: $260
MID WEST: $225
EAST COAST: $200
FULLY ASSEMBLED AND FINISHED. JUST PUT ON SIDE WINGS AND SCREW ON DRAWER FACES WITH SUPPLIED HARDWARE.
2-4 week wait time for build plus shipping time.
*****Update: Carpet and fabric samples on pg.3 post 56. High quality marine grade carpet.
Link to my for sale thread on Yankee Toys club forum with more PICS of original unit I have installed in my 80
Interest in Custom Rear Cargo Storage
Check out the finish pics from this build.
SNSbuildingremodeling.com
Last edited: