CruiserCult 40 Series Product offerings (3 Viewers)

[rlong]

I too would take a set for my 63’ (whenever I get back too it)!

 

[Cruiser Cult]

Thank you all! We will press forward with this. I also have a 3 hole 40 filler neck on hand to make a pattern so I’ll get on that, as well as a later sender unit gasket if this pre-65 one doesn’t fit the later units.

 

[Kringle]

New bushing coming soon! This is a little replaced bushing but plays a part in slop of the steering shaft. I know it’s a losing battle with 40s, but every little bit helps to tighten things up.
View attachment 3662551

Remove the slop from an early steering column - EASY!

Hey.... I want to share a great fix on my 1970 40 series steering column. This is super inexpensive and easy. @Cruiser Cult makes this bushing replacement that holds the column in place properly up by the horn ring. If your steering wheel jiggles and sloppily knocks around a bit in the...

forum.ih8mud.com

 

[Cruiser Cult]

Remove the slop from an early steering column - EASY!

Hey.... I want to share a great fix on my 1970 40 series steering column. This is super inexpensive and easy. @Cruiser Cult makes this bushing replacement that holds the column in place properly up by the horn ring. If your steering wheel jiggles and sloppily knocks around a bit in the...

forum.ih8mud.com

I guess it’s time to make more. Glad that worked and thank you for being the test pilot!

 

[Cruiser Cult]

Looks like these sender unit gaskets will work up to 1990.

 

[Cruiser Cult]

Gaskets and specs have been delivered to the gasket maker and should be ready by next week.
There will be two sender unit gasket variants after all. I discovered something interesting about the original gaskets for the pre-65 sender units that I will detail when I get the gaskets back. So we will offer a pre-1965 and a 1966-1990 sender gasket.
Cheers!

 

[Cruiser Cult]

Hey all!
First round of gaskets is done. The gasket maker needs to redo the pre-1966 gaskets for us. They were not quite right so those will be ready in another couple days. As well as the 3 hole filler neck gaskets.
Why the extra cost for Viton? Because I wanted a rubber gasket that would last and hold up against modern ethanol blended gas.
4 hole early filler neck viton gasket:

Pre-1965 FJ40 Fuel Filler Neck Viton Gasket

High quality Viton rubber gasket for your pre-1965 40 series Land Cruiser! Compatible with modern gas and liquids.

cruiser-cult.myshopify.com

1966-1990 fuel sender viton gaskets:

Viton Rrubber 1966-1990 Fuel sender gasket

Finally, a high quality Viton rubber fuel sender unit gasket for your Land Cruiser! Compatible with modern ethanol blended gas. These gaskets fit the FJ40, FJ45, FJ55, FJ60 and FJ62. 1966-1990 Automotive gas is changing and our old rigs need to adjust their rubber seals to help cope. Normal...

cruiser-cult.myshopify.com

 

[Cruiser Cult]

New document upload! Fast Moving Parts catalog. 198 pages of fun!

 

[Cruiser Cult]

New hats we just had made up. These are made of a soft cotton twill material, with a clean felt patch. An unstructured front makes it one of the most comfortable hats I’ve worn.

Available in Navy, Sky Blue and Pollux Orange.

Cruiser Hat

Let me introduce you to your next favorite hat. We made these up in a soft cotton twill, unstructured and sweat felt patch. They have a flat bill and snap back closure. These are comfortable and the perfect daily driver.

cruiser-cult.myshopify.com

 

[Cruiser Cult]

Hey all! The post 1965 FJ40 Viton rubber filler neck gaskets are finally in stock and ready to ship. Compatible with modern gas and most harsh chemicals.
HERE

 

[KennyBob]

Hey all! The post 1965 FJ40 Viton rubber filler neck gaskets are finally in stock and ready to ship. Compatible with modern gas and most harsh chemicals.
HERE
View attachment 3725061

Ordered!

 

[Cruiser Cult]

Ordered!

Thank you!

 

[Cruiser Cult]

Hey everyone!
Putting the feelers out there for a reproduction muffler bracket . Potentially interested?

Still need to determine how many years this bracket spanned but it looks like at least early 60s to 69. I believe it may be applicable up to 74ish? Can anyone else confirm that?

Once we get a better idea on feasibility and price I'll post back up. I know a lot of people move to aftermarket mufflers so curious on interest.

 

[firemanj92]

Hey everyone!
Putting the feelers out there for a reproduction muffler bracket . Potentially interested?
View attachment 3753222
Still need to determine how many years this bracket spanned but it looks like at least early 60s to 69. I believe it may be applicable up to 74ish? Can anyone else confirm that?

Once we get a better idea on feasibility and price I'll post back up. I know a lot of people move to aftermarket mufflers so curious on interest.

I just crawled under our 6/70 and it uses the same bracket

 

[Cruiser Cult]

I just crawled under our 6/70 and it uses the same bracket

Awesome! Thank you for that data point.

 

[timmyisinthewell]

There are three different p/n's for that bracket for the period from 03/69 to 01/75, but the p/n 17576-60080 covers the widest year range, from 08/69 to 01/75. My microfiche set covers the period from 03/69 to 07/80.

 

[timmyisinthewell]

Correction, there are only two p/n's for the FJ40, the third is for the FJ55

 

[Cruiser Cult]

There are three different p/n's for that bracket for the period from 03/69 to 01/75, but the p/n 17576-60080 covers the widest year range, from 08/69 to 01/75. My microfiche set covers the period from 03/69 to 07/80.

View attachment 3753268

View attachment 3753277

I wonder what the tweak was between 60020 and 60080? Hmmm

 

[timmyisinthewell]

Someone will come by here with the answer. Maybe Living in the Past, among others.

 

[flx]

Also if you get very motivated and reproduce the insulator that would be a hit !
We are cooking inside without the insulator!!