Outstanding resource. Just wish there was at least a couple reputable Cruiser mechanics in eastern WA.
FAQ CRUISER MECHANICS - Google Document (4 Viewers)
- Thread starter ukaviator
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Check out The Land Cruiser Shop in Sand point.
Hey there, Proffitt's went through an acquisition and rebirth as Proffitt's Ressurection Land Cruisers. Here is there current info:
Proffitt's Resurrection Land Cruisers
21474 Austin Rd, Orchard City, CO 81410
Phone: (970) 596-7363
www.resurrectionlandcruisers.com
Proffitt's Resurrection Land Cruisers
21474 Austin Rd, Orchard City, CO 81410
Phone: (970) 596-7363
www.resurrectionlandcruisers.com
Highly recommended from other cruiser fanatics, Glenn has decades of Toyota-specific experience... He went through my entire rig and provided a list of DYI fixes that I could address and he identified and fixed things a bit beyond my scope like a radiator fan clutch and transmission down shift cable.
I now take all my cars there and call for advice... several instances he has offered an opinion that helped me to resolve the issue on my own.
Ask for Glenn.
Advance Auto Center
409 VFW Dr
Rockland, MA 02370
(781)-792-2880
I now take all my cars there and call for advice... several instances he has offered an opinion that helped me to resolve the issue on my own.
Ask for Glenn.
Advance Auto Center
409 VFW Dr
Rockland, MA 02370
(781)-792-2880
Good thing you mentioned them. A buddy of mine from my work just had the engine in his 62 seize on his way to work this morning (never checked the oil and it ended up burning it all away), so we're towing it out to Sandpoint on Sunday so he can get a replacement engine swapped in. I'll be showing him how to take better care of it....
Dohhhh terrible news but Woody and Joe will take care of him!
Can anybody make any recommendations for Maine, New Hampshire or Northern MA? I'm in the Portland, ME area and there doesn't seem to be any independent shops that specialize in LC / LX. Please correct me if I'm wrong...
Another to add is Justin at HIgh Country Crusiers
110 Great W Ave, Pagosa Springs, CO 81147
(970) 903-1480
110 Great W Ave, Pagosa Springs, CO 81147
(970) 903-1480
Please add to the list for MN
CarSpec
7565 Corporate Way, Eden Prairie, MN 55344
(952) 426-4798
The owner John is great with Cruisers. Its a one man show right now so he's the only one wrenching. Only uses OEM parts and owns a 200 himself. Accommodating to DIY'ers and runs a helpful blog. CARspec. Although he doesn't specialize in only LC's, it's by far the best shop for 100s & 200s in the Twin Cities.
CarSpec
7565 Corporate Way, Eden Prairie, MN 55344
(952) 426-4798
The owner John is great with Cruisers. Its a one man show right now so he's the only one wrenching. Only uses OEM parts and owns a 200 himself. Accommodating to DIY'ers and runs a helpful blog. CARspec. Although he doesn't specialize in only LC's, it's by far the best shop for 100s & 200s in the Twin Cities.
This is an amazing list thanks. I just bought an '88 FJ62 from BAT.com and need to take it in for what is now a "post-purchase inspection"! 
I can tell I am losing a few ponies, and the A/C needs refreshing, but not sure what else.
Anyone have a recommendation for a preferred shop in the Los Angeles area to do that inspection, and then the follow-on work?
I can tell I am losing a few ponies, and the A/C needs refreshing, but not sure what else.Anyone have a recommendation for a preferred shop in the Los Angeles area to do that inspection, and then the follow-on work?
Still nothing for Connecticut huh? Shame cause there is a lot of Land Rover shop all over. When I had them was never an issue finding a indy for whatever I needed. Whether it was codes to read and even used parts to buy.
*** insert Land Rover reliability joke here ***
Added to gsheet
In Gsheet
In Gsheet
In Gsheet
In gsheet
Ingsheet
I've tried to add everything new I found in the FJ60 Mechanics gsheet.
I stopped replying because it would jump me to the end of the thread and I'd loose my place.
If I missed anything message me the details.
If you want to help keep the gsheet current message me.
I stopped replying because it would jump me to the end of the thread and I'd loose my place.
If I missed anything message me the details.
If you want to help keep the gsheet current message me.
- Joined
- Sep 9, 2004
- Threads
- 200
- Messages
- 12,478
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
Hey all, thought I would add myself. I am very familiar with 60/62’s. Here is a sample pic of a 60 I built.
I am opening the doors on a big Land Cruiser dedicated and specialty shop.
Four bays and enough room for six or more trucks.
I have room in the shop and on the schedule for one or two builds. Also doing smaller builds, general repairs and maintenance and just anything Cruiser.
My new location is at,
116 East 44th Street
Garden City, Idaho 83714
208-971–2625 cell
Stop by anytime!
Cheers
I am opening the doors on a big Land Cruiser dedicated and specialty shop.
Four bays and enough room for six or more trucks.
I have room in the shop and on the schedule for one or two builds. Also doing smaller builds, general repairs and maintenance and just anything Cruiser.
My new location is at,
116 East 44th Street
Garden City, Idaho 83714
208-971–2625 cell
Stop by anytime!
Cheers
